断头台剪

Baykal COMPACT HGL 3108 LM

We are selling a new, unused (stock machine) swing-cut guillotine shear with CNC control for the backgauge.

Technical data:
- Cutting length: 3060 mm
- Cutting capacity ( ST 42 ): 8.0 mm
- Cutting capacity V2A stainless steel: 5.0 mm
- Cutting angle: 1.8°
- System pressure: 200 kg/cm²
- Hold-down device: 17 pieces
- Strokes per minute: 12 cuts/min.
- Pump throughput: 32 cm³/rev
- Oil tank capacity: 160 l
- Usable measuring range of the back gauge: 5.0 mm to 750 mm
- Main motor 400 V, 50 Hz, 3 ph.: 15 KW
- Back gauge servomotor: 0.37 KW
- Increase of the backgauge range from 750 to 1000 mm
- Design of the two front support brackets with scale, T-slots and tilting cams
- Finger protection light barrier at the front instead of protective grille
(allows unobstructed view into the cutting zone)
- Weight 6380.00 kg
- Dimensions (LxWxH) 3930 x 2890 x 1600 mm

Standard accessories:
- CNC-controlled, motorized back gauge
- travel 750 mm
- with backlash-free ball screws
- with automatic folding up of the cross beam for cutting extra-long sheets
- Closed table design, consisting of interchangeable support plates including ball rollers
- Manual cutting gap adjustment, centrally operated on the right-hand side stand
- electric motor: 400 V, 50 Hz, 3-phase
- Single or continuous stroke
- Tip operation for lowering the upper beam, e.g. for adjusting the cutting gap
- 90° side stop, 920 mm long, measuring length from cutting line 1000 mm
- 2 additional support brackets (version of the two front support brackets with scale, T-slots and tilting cams)

Cybelec "Cybtouch 8W" CNC control for automatic adjustment of the cutting gap (optional):
- the cutting gap (optional)
- the backgauge
- the cutting length

Further programming functions:
- Step repetition
- piece counter
- Backgauge - retraction
- "Return to sender", smallest piece of sheet metal 100 mm x 160 mm
Isdpju Dk S Rofx Af Dstr
(not possible with sheet holder type "A", only with sheet holder type "U")
- RS-232 interface, LCD screen 128 x 64 mm
- 1 set of knives mounted on the machine, for cutting steel with a strength of 450 - 700 K/mm²
- Cutting edges: upper knife 2, lower knife 4, material grade "K110", manufacturer: Böhler Germany/Austria
- Individually acting hydraulic hold-down device with plastic inserts
- Safety devices according to CE, with light barrier at the rear
- Oil level indicator
- Indication of the cutting line by blade lighting and wire
- Operating hours counter
- CE conformity
- Operating instructions, spare parts list, wiring diagram, hydraulic diagram

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。