专用卡车

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch

Liftable drive axle
Liftable axle
Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks.
Codpfx Afox A Npdoxoaa
Front axle load max. 10.0 t (technical)
Rear axle load max. 21 t (technical)
Volvo Dynamic Steering (VDS)
330 L aluminum tank on the right
AdBlue tank usable capacity 64 liters
Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter
Electrical connection for trailer, 15-pin
Euro 6, Stage E - Onboard diagnostics
Cab color: signal white
Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side.
Front-view mirror
Exterior sun visor
LED main headlights
Headlamp cleaning system
Automatic light switching between daytime running and dipped beam
Automatic headlamp leveling
Daytime running light LED, "V-light"
LED front fog lights
Static LED cornering light
Two LED beacon lights (orange), mounted on the front of the cab roof
Cab roof pass-throughs, both sides
Pre-wiring for roof-mounted headlights, max 280 W
2 air horns on the roof, controlled from the steering wheel
Roof antenna and CB radio preparation
Roof bar for accessories, front
Emblems/type designation factory-mounted
Emission type plate (Euro...)
L plate (low-noise vehicles -96)

Flatbed executed as steel/welded construction, fixed-mounted, low design.
Length approx. 4800 mm, width approx. 2480 mm
Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L)
Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L)
Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning
6 x stake pockets for stanchions (3 per side)
Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control
Robust front wall made of welded frame with recessed stanchion depot pockets
Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color
Toolboxes between rear axles fitted with tread plate
5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space.
Sandblasted, powder-coated and painted in vehicle color.
Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics

F545RA.2.27 xe-dynamic » Base unit
Winch type V 20, for double-strand operation with folding pulley and accessories.

Endless slewing range
All hydraulic cylinders double-acting
Piston rods hard-chrome plated
Double knuckle lever system with PROLINK (overbending articulation up to 15°)
Electronic overload cut-off device with FX500
FASSI stability control FSC-S/II incl. LMB II
Emergency stop, as well as optical alarm (90% and 100%)
Pressure relief and load-holding valves
XF system (Extra Fast) + XP system (Extra Power)
RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display
Danfoss D850 control block with 4 control valves mounted on the crane column
Emergency control for crane operation
High-pressure filter supplied pre-piped
Separate hydraulic tank (180 l) with filt

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。