行走地板半挂车

STAS 10.50 "WF 60 FarmStar" 60m³ (Vermietung möglich)

Chassis manufactured using a self-supporting aluminum construction
Bsdpjfakkcofx Anisdi
with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons)

Axles and Suspension "Disc brake 22.5"
Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors

Tires and Wheels
6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate

Fifth Wheel
Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet

Braking System
According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator

Electrical System
According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside

Body/Tipping Body "Body fully welded inside"
Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left

Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

该广告为自动翻译，可能存在翻译错误。