低平板挂车

SCHWARZMÜLLER Tiefladeanhänger mit 1tlg. Stahl-Rampen

You can find our complete vehicle inventory with vehicles available immediately or in the short term on our website. Excerpt from the equipment list. Complete equipment list available upon request.

Chassis: PP004054B, steel welded construction with front frame bend and bevel at the rear, loading ramp with excavator bucket recess in the center = recess at the rear between the longitudinal beams, approx. 2,300 mm. Integrated outer frame: 5 pairs of approx. 4 t lashing bars (4 x in the low bed and 1 x on the raised platform), 7 pairs of recessed, pull-out approx. 10 t lashing rings (4 x in the low bed, 1 x in the loading ramp and 2 x on the raised platform).

PP001519B: Standard ball-bearing swivel ring.
Chassis attachments: PP004068B, pull-out extensions on both sides of the low bed platform with softwood planks, approx. 50 mm (the track width of the construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm).

PP006218B: 4 pairs of fold-up approx. 10 t lashing rings, arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess, left and right, 1 pair at the front on the raised platform in front of the bend, inside the longitudinal beams, 1 pair in the low bed at the rear in front of the loading ramp, in the bucket recess left + right.

Towing device: PP004065B, fixed drawbar with pivoting drawbar eye, approx. 40 + 50 mm, pivoted design, rubber bearing, drawbar retaining spring with tensioner.

PP005072S: Truck coupling height from approx. 840 mm to approx. 1,030 mm.
PP004059B: Drawbar length approx. 1,800 mm.

Support system: PP004057B, 2 automatic folding supports at the rear.

Axles: PP004114B, SAF air suspension low-bed axles with drum brakes, load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjuster.

Wheels: PP000245B, 12 tires 235/75 R 17.5, 141J, manufacturer to be chosen by the factory.

Braking system/suspension: PP004056B, braking system according to ECE directive R13, two-line compressed air braking system, braking system manufacturer Wabco, EBS system 4S3M, 1st + 2nd axle sensorized.

PP000050B: RSS/RSP stability program.
PP001532B: Spring-loaded parking brake on 2nd + 3rd axle.
PP000049B: Steel air tank.
PP001536B: Brake/air connection lines with 2 single coupling heads, yellow/red, EBS/ABS connection cable.

PP005702B: Rubber band as a holder for EBS and electrical connectors.
PP004111B: Air suspension with lifting and lowering device (only for rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle.

Floor: PP007568B, softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above the upper edge of the frame, steel checker plate covering over the wheels.

Ramps: PP007134B, 2 folding, one-piece, lightweight steel ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm impregnated, ramps can be moved in width from an intermediate distance of approx. 350 mm to a maximum total width of approx. 3,000 mm.

PP004070B: Ramps can be locked in the driving position by chains with tensioner.
Lhsdpfxjz Ed Auj Agmjl
PP004072B: Ramp lifting aid with coil spring.
PP004074B: Ramps can be moved sideways manually with a rod.
PP004097B: Square ribs are welded to the outside of each ramp and the rear loading ramp.

Painting: PP004077B, steel granulate cleaning, shot blasting, multi-layer epoxy zinc phosphate primer an

该广告为自动翻译，可能存在翻译错误。