打捆机Presona AB
LP 80 VH1
打捆机
Presona AB
LP 80 VH1
製造年份
2007
狀況
二手
位置
Velbert 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Gewerbestraße 19, 42553 Velbert, Deutschland

撥打
技术细节
- 压压力:
- 78 t
- 灌装开口宽度:
- 750 毫米
- 填充口长度:
- 1,500 毫米
- 捆宽:
- 1,100 毫米
- 捆包高度:
- 750 毫米
- 捆重:
- 600 千克
- 总重量:
- 25,000 千克
- 运输高度:
- 3,000 毫米
- 油箱容量:
- 1,000 l
- 功率:
- 55 千瓦 (74.78 马力)
- 空载重量:
- 25,000 千克
- 体积流量:
- 930 立方米/小时
- 工作压力:
- 250 横杆
优惠详情
- 產品ID:
- A18004191
- 參考編號:
- Presona-LP80VH1
- 最後更新:
- 於 02.11.2025
描述
How do you do?
We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1.
The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness.
Manufacturer Presona AB, Sweden
Type LP 80 VH1
Year of manufacture 2007
Total operating hours, 21,676 hours, as of November 2024
Main press force 78 t
Specific pressing force 95 N/cm²
Pressing force of prepress flap 28 t
Dimensions of feed chute 1,500 x 1,100 mm
Filling volume / pressing cycle 2.7 m³
Throughput capacity under operating conditions 410 m³/hour
Nodovgrh Uspfx Aadswp
Bale dimensions 1,100 x 750 mm
Drive power 55 kW
Tying 5-fold vertical
Hydraulic oil tank volume 1,000 L
Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H)
Machine weight press approx. 25 t
Note:
The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment.
We would be delighted if this machine is of interest to you.
Your service team Mertens & Frowein GmbH
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1.
The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness.
Manufacturer Presona AB, Sweden
Type LP 80 VH1
Year of manufacture 2007
Total operating hours, 21,676 hours, as of November 2024
Main press force 78 t
Specific pressing force 95 N/cm²
Pressing force of prepress flap 28 t
Dimensions of feed chute 1,500 x 1,100 mm
Filling volume / pressing cycle 2.7 m³
Throughput capacity under operating conditions 410 m³/hour
Nodovgrh Uspfx Aadswp
Bale dimensions 1,100 x 750 mm
Drive power 55 kW
Tying 5-fold vertical
Hydraulic oil tank volume 1,000 L
Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H)
Machine weight press approx. 25 t
Note:
The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment.
We would be delighted if this machine is of interest to you.
Your service team Mertens & Frowein GmbH
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误














