三坐标测量机

Mitutoyo Crysta-Apex C574

2010 Mitutoyo Crysta-Apex C574 High-Accuracy, 3D CNC Coordinate Measuring Machine

Giedpfx Apjzk Dpzeqow
Serial number: 80461121; Measuring range (X x Y x Z): 500 mm x 700 mm x 400 mm; Table size: 1160 mm L x 638 mm W; Maximum Workpiece Height: 180 kg; Maximum Workpiece Height: 545 mm; Drive Speed: Up to 520 mm/s; Acceleration: 0.17 G (1,667 mm/s²); Linear Encoder Resolution: 0.1 μm (0.0001 mm); Accuracy: MPE (Maximum Permissible Error) typically ranges from E₀ = (1.7 + 3L/1000) μm; Equipped Reinshaw TP 200 compact module-changing probe; Principal application: DCC CMM where high accuracy is required; Sense directions: 6-axis (±X, ±Y, ±Z); Unidirectional repeatability (2σ µm): Trigger level 1: 0.40 μm (0.000016 in), Trigger level 2: 0.50 μm (0.00002 in); XY (2D) form measurement deviation: Trigger level 1: ±0.80 μm (0.000032 in), Trigger level 2: ±0.90 μm (0.000036 in); XYZ (3D) form measurement deviation: Trigger level 1: ±1.00 μm (0.00004 in), Trigger level 2: ±1.40 μm (0.000056 in); Repeatability of stylus change: With SCR200: ±0.50 μm (0.00002 in) maximum, Manual: ±1.00 μm (0.00004 in) maximum; Trigger force (at stylus tip): XY plane (all modules): 0.02 N, Z-axis (all modules): 0.07 N; Overtravel force (at 0.50 mm displacement): XY plane (SF/EO module): 0.2 to 0.4 N, XY plane (LF module): 0.1 to 0.15 N, Z-axis (SF/EO module): 4.90 N, Z-axis (LF module): 1.60 N; Weight (probe sensor and module): 22 g (0.78 oz); Maximum extension (when mounted on a PH10 PLUS series head): 300 mm (11.81 in); Maximum recommended stylus length (M2 styli range): SF/EO module: 50 mm steel to 100 mm GF, LF module: 20 mm steel to 50 mm GF; Mounting method: M8 thread; Suitable interface: PI 200-3, UCC; Stylus module changing rack: SCR200; Stylus range: M2; Equipped with Reinshaw SCR200 stylus change rack; Weight: 0.75 kg; Mounting orientation: Vertical or horizontal; Mounting fixture: Single stud (M8, M10); Number of ports: 6; Repeatability of stylus change (2σ) at 50 mm: Automatic ≤ 1 μm, Manual ≤ 2 μm; Entry speed: Unrestricted; Module pull-off force: 800 g maximum; Overtravel protection: Electromechanical (minimum deflection: 5); LED indicators: Power: Green, Status: Red (flashing during probe inhibit); Change cycle detection: Optoelectronic beam system with Hall effect proximity sensor; Multi-rack usage: Up to two SCR200 units (12 ports) may be connected with a special cable; all needed documents will be provided in order to restart the machine

Machine Weight: 625 kg; Maxine Dimensions: 2200 mm L x 1500 mm W; Inv. Nr: 2077; Due to the dual-use classification of these instruments, all transactions involving them must be approved by Mitutoyo Japan; Mitutoyo can also provide transportation preparation, installation, and commissioning at the new location as a paid service. Optional loading services are available on site. Indicative price: 70 EUR, VAT not included;