压块机 铝压块机

mütek MPP NEM 90

All wear parts new
only 704 operating hours

Special price for a low-hour demonstration unit
Base machine: €29,990 net

Optional extras (for an additional charge):
Hodpfxjd N Dnhe Annol
- Cooling unit: €3,995 net
- Emulsion tray: €3,990 net

The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%.

Throughput capacity: maximum 70 kg/h (depending on material)
Briquette diameter: Ø 50 mm
Motor: 5.5 kW
400 Volt / 50 Hz / 3-phase
Pump: 40 liters

Maximum briquette length: 50 mm
Optimal briquette length: 40 mm
Silo diameter: 1,000 mm
Oil tank: 110 liters

Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg

Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder

Fill level sensor: yes

Feed material requirements:
- Max. chip length: 15 mm
- Installation room temperature: heated space, at least +5°C
- Max. load on agitator: 150 kg
- Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

该广告为自动翻译，可能存在翻译错误。