48 伏皮带启动发电机测试台Kübrich
Komponentenprüfstand
48 伏皮带启动发电机测试台
Kübrich
Komponentenprüfstand
状况
二手
位置
Borken 

显示图片
显示地图
机器数据
价格和位置
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

拨打
优惠详情
- 广告编号:
- A17123082
- 参考编号:
- 24317
- 更新:
- 最近更新时间为 15.11.2024
描述
Kübrich
Kübrich test systems 48V belt starter generator - component test bench
Details of the test stand: (see Fig. 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Switch cabinet
(5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O
(6) MP2: Switch cabinet with Simotion
(7) MP4: Switch cabinet with DC-DC converter
(8) H3: Measurement technology box
(9) H4: Transfer box
Intended use:
The test stand is used to carry out tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current intensity: 330 A (short term, less than 1 s)
Control voltage 24 V
Mechanical performance data according to the data sheet of the load machine
A transmission ratio of 1:2 to the test specimen shaft must be observed.
Cedeumv Emepfx Abxjgp
Speeds:
Load machine:
Set-up mode: 0 - 50 1/min
Automatic mode: 0 - 10 000 1/min
Test specimen motor:
Set-up mode: 0 - 100 1/min
Automatic mode: 0 - 20 000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
该广告为自动翻译,可能存在翻译错误。
Kübrich test systems 48V belt starter generator - component test bench
Details of the test stand: (see Fig. 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Switch cabinet
(5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O
(6) MP2: Switch cabinet with Simotion
(7) MP4: Switch cabinet with DC-DC converter
(8) H3: Measurement technology box
(9) H4: Transfer box
Intended use:
The test stand is used to carry out tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current intensity: 330 A (short term, less than 1 s)
Control voltage 24 V
Mechanical performance data according to the data sheet of the load machine
A transmission ratio of 1:2 to the test specimen shaft must be observed.
Cedeumv Emepfx Abxjgp
Speeds:
Load machine:
Set-up mode: 0 - 50 1/min
Automatic mode: 0 - 10 000 1/min
Test specimen motor:
Set-up mode: 0 - 100 1/min
Automatic mode: 0 - 20 000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
该广告为自动翻译,可能存在翻译错误。
这些广告您可能也感兴趣。
小广告
Odesa
6,044 km
涡轮测试台
VTM GroupGeoBoost-7000
VTM GroupGeoBoost-7000
小广告
Odesa
6,044 km
VNT 涡轮流量计
VTM GroupGEOMET-2000
VTM GroupGEOMET-2000
小广告
英国
7,795 km
车间压力机
RHTC100 TON M/H-M/C-2 Hydraulic Press
RHTC100 TON M/H-M/C-2 Hydraulic Press
小广告
Vincennes
7,857 km
二手科勒SDMO柴油发电机组 70 kVA
kohler SdmoJS70
kohler SdmoJS70
小广告
Terlano
7,418 km
木箱前集
RÖHMMitnehmersatz
RÖHMMitnehmersatz
小广告
Neumarkt-Sankt Veit
7,240 km
饮料机
Kosme
Kosme
您的广告已成功删除
发生错误







































































