作业平台半挂车

KÖGEL 3-Achs-Sattelanhänher Multi Chassis

You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis
10110.122 Regular ladder frame in lightweight steel construction with through-bolted crossmembers.
10115.010 With overhang of the chassis frame.
10300.108 Fifth wheel coupling plate, approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337.

Suspension
I 17160.010 Axle lift mechanism on axle 1.
I 17165.103 Axle lift control, fully automatic, load-dependent.
Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h.
I 17170.010 Operation on the chassis via a switch. Also possible from the cab (switch in the cab required - PIN 12).
18330.700 Manufacturer of your choice Kögel - Three-axle unit, with disc brakes Ø approx. 430 mm, insertion depth approx. 120 mm.
Air suspension with approx. 180 mm travel.

Vehicle Tires
L20520.010 Wheels with internal sensors according to UN ECE R141.
20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J)

Chassis Components
20110.010 Fifth wheel supports (manufacturer of your choice from Kögel), mechanical with leveling foot, 24 t lifting capacity. Single-sided operation on the right side when driving.
I 21070.117 Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles.
22070.013 Side protection device according to ECE-R73.
I 25620.102 2 plastic toolboxes, waterproof, dimensions (internal) approx. 525 x 390 x 410 mm. Installation at the rear, 1x left and 1x right.
27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58.
I 71800.020 1 pair of extendable warning panels (approx. 280x280mm) for overwidth loads, retroreflective red / white, with LED lighting, spiral cable and plug connection.

Brake / Air Suspension System
32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection.
I 32125.015 WABCO EBS system
33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Driving position is automatically set.
34320.001 2 fail-safe coupling heads at the front ISO 1728
34410.010 Air tanks for brake system and air reserve made of steel (EN 286-2).

Floor
40510.120 Flat floor, approx. 30 mm thick
I 40513.020 Floor caulked around the entire perimeter
I 40542.023 Pockets for square tube inserts approx. 80 x 80, arrangement according to drawing J9: 8 pieces of pocket rail strips (18 pocket recesses per strip: 4 pieces each on the outside + 10 pieces in the middle).

Front Wall
I 40532.260 Storage for max. 20 square tube inserts 80 x 80 (length 1,990 mm) on the inside of the front wall.
I 41710.201 Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, screwed / riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front end panel according to EN 12640.
Fodpfxoz N Nxde Ab Repn

Side Wall
43540.380 Va

该广告为自动翻译，可能存在翻译错误。