可更换底盘拖车Fliegl
Tandem Wechselanhänger TWP 180 Mega-EL
可更换底盘拖车
Fliegl
Tandem Wechselanhänger TWP 180 Mega-EL
EXW VB 不含增值税
€12,900
出厂年份
2024
状况
二手
位置
Triptis 

价格和位置
EXW VB 不含增值税
€12,900
- 位置:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

拨打
技术细节
- 空载重量:
- 3,200 千克
- 最大载重重量:
- 14,800 千克
- 总重量:
- 18,000 千克
- 车轴配置:
- 2 轴
- 首次注册:
- 01/2025
- 下次检验 (TÜV):
- 01/2027
- 总长度:
- 10,020 毫米
- 总宽度:
- 2,550 毫米
- 总高度:
- 1,040 毫米
- 悬挂系统:
- 空气
- 轮胎尺寸:
- 445/45 R19,5"
- 轮胎状况:
- 60 百分比
- 颜色:
- 灰色
优惠详情
- 广告编号:
- A22548797
- 参考编号:
- 71843
- 更新:
- 最近更新时间为 13.08.2026
描述
Note: The images shown are archive photos. The vehicle may currently be in use!
Tandem-Axle Swap Body Trailer
Type TWP 180 Mega-EL
WEIGHTS AND DIMENSIONS
Gross vehicle weight: 18,000 kg
Payload approx.: 14,800 kg
Axle assembly load rating: 18,000 kg
Support load (drawbar): 1,000 kg
Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance
Frame height lowered approx.: 1,010 mm
Frame height raised approx.: 1,390 mm
Frame height in driving position approx.: 1,070 mm
Parking height approx.: 1,040-1,320 mm
Standard stop to front locking approx.: 985 mm
Locking distance: 5,853 mm
Coupling height approx.: 380 mm
Parking heights apply on level ground.
The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle.
CHASSIS - CENTRE-AXLE SWAP BODY TRAILER
Fine-grain steel welded construction
Front stop, longitudinally adjustable and foldable
2 pairs of removable guide rollers, front and rear
4 twist locks with sturdy brackets, 20" base
For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body)
Gsdpfozufl Sjx Anksbr
1 pair of geared landing legs front, straight foot, single-side operation on the right
1 pair of geared landing legs rear, straight foot, single-side operation on the right
2 wheel chocks with holder
Aluminium side underrun protection
Steel rear underrun protection
Rear mudflaps, full width (not combinable with forklift pocket holder)
Half-shell mudguards
Mudflaps
DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER)
Drawbar with certified 50 mm towing eye, haulage version
Adjustable drawbar coupling height, 2,200 mm
Coupling height: 380 mm
AXLES & SUSPENSION
SAF disc brake axles
Axles/running gear laser-aligned - reduces tyre wear and fuel consumption
Air suspension
BRAKING SYSTEM
Two-line compressed-air braking system
Colour-coded line routing for easy servicing
Air reservoir capacity: 208 litres
Spring-loaded parking brake
2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right
24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right
Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
With raise/lower valve, hold function in both lowered and raised position
WHEELS AND TYRES
445/45 R19.5", make at manufacturer's discretion
Steel rims, factory silver
ELECTRICS
24V multi-chamber lights, yellow LED side marker lights
2 white position lights at front
2 white/red rear outline marker lights
2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right
2 additional LED work lights at the rear, activated via reversing light
1 LED work light front-centre between the beams, facing rearward, activated via reversing light
REGISTRATION COUNTRY / PLATES
Germany
With DEKRA inspection and certificate (acc. to §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear
PAINT
Frame: DB 7350 Nova grey
10-year warranty against corrosion perforation
Tandem-Axle Swap Body Trailer
Type TWP 180 Mega-EL
WEIGHTS AND DIMENSIONS
Gross vehicle weight: 18,000 kg
Payload approx.: 14,800 kg
Axle assembly load rating: 18,000 kg
Support load (drawbar): 1,000 kg
Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance
Frame height lowered approx.: 1,010 mm
Frame height raised approx.: 1,390 mm
Frame height in driving position approx.: 1,070 mm
Parking height approx.: 1,040-1,320 mm
Standard stop to front locking approx.: 985 mm
Locking distance: 5,853 mm
Coupling height approx.: 380 mm
Parking heights apply on level ground.
The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle.
CHASSIS - CENTRE-AXLE SWAP BODY TRAILER
Fine-grain steel welded construction
Front stop, longitudinally adjustable and foldable
2 pairs of removable guide rollers, front and rear
4 twist locks with sturdy brackets, 20" base
For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body)
Gsdpfozufl Sjx Anksbr
1 pair of geared landing legs front, straight foot, single-side operation on the right
1 pair of geared landing legs rear, straight foot, single-side operation on the right
2 wheel chocks with holder
Aluminium side underrun protection
Steel rear underrun protection
Rear mudflaps, full width (not combinable with forklift pocket holder)
Half-shell mudguards
Mudflaps
DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER)
Drawbar with certified 50 mm towing eye, haulage version
Adjustable drawbar coupling height, 2,200 mm
Coupling height: 380 mm
AXLES & SUSPENSION
SAF disc brake axles
Axles/running gear laser-aligned - reduces tyre wear and fuel consumption
Air suspension
BRAKING SYSTEM
Two-line compressed-air braking system
Colour-coded line routing for easy servicing
Air reservoir capacity: 208 litres
Spring-loaded parking brake
2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right
24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right
Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
With raise/lower valve, hold function in both lowered and raised position
WHEELS AND TYRES
445/45 R19.5", make at manufacturer's discretion
Steel rims, factory silver
ELECTRICS
24V multi-chamber lights, yellow LED side marker lights
2 white position lights at front
2 white/red rear outline marker lights
2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right
2 additional LED work lights at the rear, activated via reversing light
1 LED work light front-centre between the beams, facing rearward, activated via reversing light
REGISTRATION COUNTRY / PLATES
Germany
With DEKRA inspection and certificate (acc. to §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear
PAINT
Frame: DB 7350 Nova grey
10-year warranty against corrosion perforation
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2006
196 在线广告
发送询价
电话 & 传真
+49 36482... 广告
您的广告已成功删除
发生错误















































