集装箱底盘半挂车

FLIEGL SDS 380 Kippchassis Vario Kipp 20/30

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Chassis, Saddle, and Container
Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions.
Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring.
Container mounts:
Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container.
Gbjdpfxoi Ri Ave Ab Top
Adjustment via central telescope as an interlocking central tube frame with bolt locking.
24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation.
Free support foot angle or free swivel radius to the rear approx. 1850 mm.
2 chock blocks with holder.
Half-shell mudguards with anti-splash flaps according to EC standards.
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm.
(without hose connection)
Actuation hydraulically via truck auxiliary drive.
Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter.
Axle/chassis laser-aligned, reducing tire wear and fuel consumption.
Axle spacing offset mm (combined transport) up to 44 tons total weight.
Air suspension
Braking System
2-line compressed air braking system
Color-coded line routing for easy servicing.
Spring-loaded parking brake
Tele Control
Axle load reduction for easy telescoping.
2 fail-safe coupling heads at the front, without connecting line.
EBS, electronic braking system with EBS socket at the front, without connecting cable.
Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS!
With lifting and lowering valve.
Vehicle - Driving Stability System
Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation.
Wheels and Tires
385/65 R22.5, manufacturer's choice.
Steel rims, factory silver.
Electrical System
24 Volt, multi-chamber lights, yellow LED lighting on the side.
2 white position lights at the front.
2 white/red marker lights at the rear.
2 x 7-pole fail-safe sockets at the front, without connecting cable.
Additional LED work light at the rear, switched via reversing light.
Country of Approval / Signs
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for license plate holder, single-line.
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.
Paintwork
Frame DB 7350 Novagrau (dark gray)
10-year warranty against rust-through.
Support legs, black coated.

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

该广告为自动翻译，可能存在翻译错误。