液压双柱压力机

Emanuel 500 Tonnen Doppelständerpresse

pressure:500 t
passage width:1600 x 1300 mm
stroke:1100 mm
Table size:1600 x 1300 mm
open height:1700 mm
Press speed:25,2 - 9,4 mm/sec
Approach Speed:300 mm/sec
return speed:200 mm/min
machine dimensions LxWxH:2800 x 1800 x 7200 mm
Weight (approx.):55 t
Godpfxjffamro Afmott

Description of the press frame
The frame is designed as a frame construction with 2 operating sides. It consists of highly dimensioned braces, which are tightly and rigidly welded with upright steel ribs. The complete welding part is processed on precision machines.
As a stiff box construction. The underside of the box is formed by a solid welded steel plate, which is prepared for the assembly of insulation and heating plates. The complete welding part is processed on precision machines.
Integrated guide and cylinder connections in a power optimised design.
Plunger Guide The plunger is guided diagonally through a prism guide, i.e. the angle of the guide is designed so that the contact surfaces run parallel to the diagonals of the press table.
This arrangement guarantees a consistent guiding game, as the guide surfaces move along their line of gravity at temperature differences of the frame and plunger. The design of the guide is completely force-and form-fit, so that no torque or force is applied to the fastening of the guide jaws. This means that the guide can be adjusted very precisely and works with high accuracy. The length of the guide is chosen in relation to the width of the table so that it can be dispensed with.
The sliding pairing is special bronze against steel. Lubrication is carried out via lubricant generator.
Hydraulic unit the hydraulic system is located in the upper part of the press frame. It is completely piping, connected and mounted.
The hydraulic unit consists of a high pressure pump with drive motor, as well as all the components required to function the press; In addition, auxiliary and control drives are used.
Proportional valves are installed for the lifting and lowering movements. The short pressure build-up time in connection with the specified press speed leads to the use of a storage station. Appropriate times and cycles in the process must be taken into account when loading the storage station. Details see technical data.
Safety Equipment The press complies with the applicable safety regulations according to UVV, as well as the standards valid for the EU, in the latest version for the scope of delivery described.
2.3 Electric Press Control S7/OP27-The controller is operated on the basis of a PLC manufacturer Siemens (S7) with a Control Panel Siemens op 27.
-The press is FABR with a measuring system. BALLUFF.
-The switch cabinet with control power and safety part is positioned to the right of the press. Max distance to press 5 m