棒料加工中心

Elumatec SBZ 150

elumatec SBZ150 Profile Machining Centre 6.0 m

5-axis control. Efficient machining of aluminium and steel profiles
Working length: 6,000 mm

Description:
Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option);
Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning;
Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system;
Robust machine bed for a working length of 6,000 mm;
Continuous support table;
Clamping system with integrated six-row recirculating roller units and linear guides.
5-axis industrial PC control, with
3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable;
With color screen and disk drive;
Memory capacity of over 200,000 sets;
3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc.
Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator)
Analog modem (customer must provide an analog telephone line)

Technical data:
Travel range X-axis: max. 6,240 mm
Max. travel speed 60 m/min.
Travel range Y-axis: 1,000 mm
Max. travel speed 30 m/min
Travel range Z-axis: 635 mm
Max. travel speed 30 m/min.
Swivel angle A-axis: 0-90° freely programmable
Swivel angle C-axis: 0-355° freely programmable
Further details on the milling range see drawing no. 150 05 17 08
Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm)
Positioning accuracy:
X-axis +/- 0.1 mm / 1 m length
Y-axis +/- 0.1 mm
Z-axis +/- 0.1 mm

Milling spindle:
Speed [rpm]: up to 100–22,000
Power [kW]: 15
Tool holder: HSK-F 63
Milling cutter diameter: 100 mm max.
Saw blade diameter: 400 mm
Tool length: max. 150 mm from nominal taper.

Included accessories:
Automatic tool changer (without tool holders);
Dual-circuit clamping system with 2 pneumatically retractable material stops;
Automatic clamp detection and positioning;
8 horizontal pneumatic material clamping units;
Tool presetting gauge
Front light barrier
Saw blade D400 with mount
Angle milling head

Important:
The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us.

Incl.
Ljdpfx Alow A Rv Ioderk
Angle milling head for underside machining

该广告为自动翻译，可能存在翻译错误。