立式带锯机带激光指示器

CORMAK HBS421

The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking.

Drive Wheels and Blade Guidance

In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in:

Reduced vibration at higher feed rates

Improved edge quality—especially in harder wood species

Extended blade life thanks to stable operation and correct tension

Worktable and Angle Adjustment

The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required.

Drive System and Continuous Operation

The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control.

Dust Extraction and Workstation Ergonomics

Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves:

Work safety (reduced airborne dust)

Visibility of the cutting line

Service life of working components by limiting dust accumulation

Precision and Productivity

In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste.

Standard Equipment

High-voltage release switch

Dust extraction port 2 × 100 mm

Precision rip fence

Cutting blade 3345 × 20 mm, 8 TPI

Optional Equipment

100 mm extraction hose

Galvanized clamp

Mobile base (up to 260 kg capacity)


Technical Specifications

Wheel diameter [mm]: 480

Maximum cutting height [mm]: 240

Maximum cutting width [mm]: 405

Blade width [mm]: 9.5 – 38.1

Blade length [mm]: 3345

Blade speed [m/s]: 7 / 14

Table tilt range [°]: 0 to +45

Table dimensions [mm]: 535 × 435

Overall dimensions [mm]: 830 × 550 × 2070
Hjdpfxoyk Apno Agbenh

Weight [kg]: 160

Motor power: S1 – 2.2 kW / S6 – 3.1 kW

Power supply: 3-phase, 400 V

Manual (DTR): Yes

CE Declaration: Yes