激光切割机Trumpf
TruLaser Cell 8030
机器数据
技术细节
- 控制器制造商:
- Siemens SINUMERIK 80 D
- X轴行程:
- 3,000 毫米
- Y轴行程:
- 1,300 毫米
- Z轴移动距离:
- 600 毫米
- X轴进给速度:
- 100 米/分钟
提供
- 位置:
- Hessen, 德国
– 距离：约 7,282 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Work area
X-axis: 3,000 mm
Y-axis: 1,300 mm
Z-axis: 600 mm
B-axis: ±135°
C-axis: n × 360°
Speeds
X / Y / Z-axis: 100 m/min
B / C-axis: 540 °/s
Acceleration
Simultaneous: 17.3 m/s²
X / Y / Z-axis: 10 m/s²
B / C-axis: 200 | 100 rad/s²
Maximum positioning accuracy
Linear axes X / Y / Z: 0.03 mm
Rotary axes B / C: 0.005°
Maximum positioning deviation
Linear axes X / Y / Z: 0.08 mm
Rotary axes B / C: 0.015°
MACHINE DETAILS
Laser type: Solid-state laser TruDisk 3001
Laser power: 3,000 W
Cutting gas: Nitrogen
Control: Siemens SINUMERIK 80 D
Operating hours
"Laser On" hours: 94,936 h
Operating hours: 99,293 h
EQUIPMENT
Magnetic coupling
Dynamic cutting optics with f = 150 mm
FocusLine
FastLine Cell
ObserveLine
Rotary changer D = 4,000 mm including rear protection
Scrap conveyor
4× configurable control interface
Valve terminal for 8 pneumatic clamps per side
2× loading status indicators for rotary changer
Extended compressed air supply on mounting sheet including vacuum ejectors
Cutting gas compressed air
Renishaw probe
Measuring head (without probe)
Measurement data processing
3× horizontal fixture interface
Exhaust ducting
Protective cabin for rotary changer including safety device, 1 window and column for console
Status lights top & bot
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A20685450
- 参考编号:
- AUC-2512038
- 更新:
- 最近更新时间为 05.12.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Val-au-Perche TRUMPFTruLaser Cell 8030 L60
Saerbeck DURMAAD-S 30320
Val-au-Perche TRUMPFTruLaser Cell 8030 L60
Łódź TRUMPFTruLaser Cell 8030
Sittard MaedaMC 285CWMB-3 | 2021
Wiefelstede DONAUDR30
Bühl MENGELEH 160-3
Gretzenbach Mercedes-Benz1428 AF 4x4
Dn10 4Es Balpe
Lutterworth Kardex Shuttle NT2000Shuttle NT2000
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。