TRAUB TNL 32 P
TRAUB TNL 32 P

Name: TRAUB TNL 32 P
Brand: TRAUB
Availability: InStock

出厂年份

2012

状况

二手

位置

德国

机器数据

机器名称:: TRAUB TNL 32 P

制造商:: TRAUB

型号:: TNL 32 P

出厂年份:: 2012

状况:: 可投入使用（二手）

运行小时数:: 19,295 h

价格和位置

位置:: , 德国

拨打

技术细节

主轴电机功率:: 10,700 瓦特

主轴速度（最大）:: 8,000 转/分

总重量:: 6,000 千克

总宽度:: 2,500 毫米

总高度:: 2,600 毫米

棒材直径（最大）:: 32 毫米

X轴行程:: 140 毫米

控制器制造商:: TRAUB

控制器型号:: TX 8i-p

产品长度（最大）:: 4,500 毫米

轴数:: 7

优惠详情

广告编号:: A22106323

参考编号:: DE-TUR-TRA-2012-00001

更新:: 最近更新时间为 12.06.2026

描述

This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details.

• Number of Turrets: 2
• Maximum Z-Axis Travel: 305 mm
• Main Spindle Torque: 21 / 32 Nm
• Main Spindle C-Axis Resolution: 0.001°
• Turret 1 Tool Stations: 10
• Turret 1 Live Tool Stations: 10
• Turret 1 Live Tool Speed: 12,000 rpm
• Turret 1 Live Tool Power: 1.5 / 2.5 kW
• Turret 1 Tool Holder Diameter: 45 mm
• Turret 1 Turning Tool Shank: 16 x 16 mm
• Turret 1 X-Axis Travel: 140 mm
• Turret 1 Z-Axis Travel: 305 mm
• Turret 1 H-Axis Resolution: 0.001°
• Turret 1 Chip-to-Chip Time: 0.3 sec
• Turret 2 Tool Stations: 9
• Turret 2 Live Tool Stations: 9
• Turret 2 Live Tool Speed: 12,000 rpm
• Turret 2 Live Tool Power: 1.5 / 2.5 kW
• Turret 2 Tool Holder Diameter: 45 mm
• Turret 2 Turning Tool Shank: 16 x 16 mm
• Turret 2 X-Axis Travel: 140 mm
• Turret 2 Y-Axis Travel: -25 / +40 mm
• Turret 2 Z-Axis Travel: 320 mm
• Turret 2 Chip-to-Chip Time: 0.3 sec
• Counter Spindle Speed: 8,000 rpm
• Counter Spindle Power: 1.5 / 2.5 kW
• Counter Spindle Torque: 4.5 / 7.7 Nm
• Counter Spindle C-Axis Resolution: 0.001°
• Maximum Clamping Length: 250 mm
• Maximum Bar Diameter (Counter Spindle): 32 mm
• Back Working Tool Stations: 8
• Back Working Live Tool Stations: 3
• Back Working Live Tool Speed: 12,000 rpm
• Back Working Live Tool Power: 1.5 / 2.5 kW
• Back Working Tool Holder Diameter: 36 mm
• Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min
• Maximum Feed Rate: 20,000 mm/min
Gbsdpjzcyhxofx Abmon
• Total Power Requirement: 46 kW
• Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm
• Chip Conveyor: Optional, not included
• Coolant System: Yes
• Tool Turrets: 2
• Back Working Unit: Yes
• Bar Feeder Interface: Yes
• Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m
• Electronic Handwheel: Yes
• Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective.

Technical Specification
Counter Spindle Yes
Driven Tools Yes
Through-spindle Coolant Yes