TEKA Airtech 焊烟抽排系统

TEKA AirTech P10

Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10.
The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall.
Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter.
Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank.
The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts.
The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency.
Low compressed air consumption thanks to the "Power-Spray" system.

Parameters:
Capacity - 10,000 m3/h
Motor power - 11 kW
Filtration area - 100 m2
Fan in a sound-absorbing housing

Year of manufacture - 2011
Number of operating hours - 2591 h
Dimensions:
Height - 4.00 m
Base width - 1.20 m x 0.80 m

Stock number: 1173
Dwedpoz N Am Ujfx Am Doc

该广告为自动翻译，可能存在翻译错误。