平板卡车

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Tatra Phoenix 41.500 8x8 All-wheel Drive with Fassi Crane with Jib and Winch
New vehicle with day registration 06/2025
Long-distance driver's cab

Removable flatbed
Can be used as a tractor unit

* Model: TATRA PHOENIX
* Drive: 8X8/6, last axle driven and steered, AP axles
* Engine: MX13, 390 kW (530 Hp) 1675 rpm, 2500 Nm
* 1000 - 1425 rpm
* Transmission: Automated gearbox ZF TraXon 16TX2640, 16 gears
* Steering: Left-hand drive
* Cabin: Long-distance cab, H3279WHTE
* Gross weight: 41,500 kg
* Sleeper cab
* Side fenders
* External sun visor (green, translucent)
* Non-heated windscreen
* Non-glazed sides / rear
* Electrically adjustable mirrors
* Convex mirrors
* With maneuvering mirror, front
* Central locking with remote control, 2 keys
Cab - interior:
* Luxury Air
* Storage compartment under dashboard, long
* Lower bunk mattress, standard
* Lower bed raised by 250 mm (sleeper cab, storage space 260 liters)
* No upper bed (long cab)
* Trailer couplings without center section
* Cool box or refrigerator (sleeper cab)
* Aluminum roof hatch, manual operation
* Control for cab air conditioning
* Dashboard - Black Rock
* Cab wall trim textile
* Interior trim color "DARK SAND"
* Immobilizer 5 minutes SCM BV03-B1
* Standard auxiliary power supply
Communication and drive management:
* ALPINE communication system with camera
* Antennas: AM/FM + 2x GSM + GPS
* Digital tachograph
* Cruise control
* Toll preparation (Germany only)
Wheels:
* Continental 385/65R22.5 HSC1 XL TL[4] (10t) +315/80R22.5 HDC1 ED TL[9], mixed operation
* Spare wheel mounted on frame in transport position
Drivetrain:
* MX13, 390 kW (530 Hp) 1675 rpm, 2500 Nm
* 1000 -1425 rpm
* ZF 16TX2640TO TraXon, engine MX13 (355 kW, 390 kW)
* 2-step gear ratio 2.30 TRK 0.61/1.44 H8, downshifting, switchable from standstill
Chassis:
* Driven axle, axle load capacity 10t, small wheels
* 8X8/6

Crane:

- Type: F710RA.2 xhe-dynamic
- Endless slewing range
- All hydraulic cylinders double-acting
- Piston rods hard-chromed
- Double knuckle boom system with PROLINK
(articulated boom overbendable up to 10 degrees)
- Electronic overload shutdown device with FX900
- FASSI stability control FSC-SII incl. LMB II
- Emergency stop, as well as optical alarm (90% and 100%)
- Pressure limiting and load holding valves
- XF system (Extra Fast) + XP System (Extra Power) + FL System (Full Lift)
- RCH or RCS FASSI radio remote control
with linear levers and display
- Pressure readouts (in bar and %) and 90% + 100% warning on display
- Danfoss D900 control block with 4 control valves
mounted on the crane column
- Emergency operation for crane control
- High pressure filter supplied piped
- Separate hydraulic tank (260l) with filter and
oil cooler mounted on the crane base
- Hydraulic outriggers, hydraulically extendable on both sides,
outriggers width 8.29m
- Outriggers operable via radio remote control (black/white)
- IMC system (Integral Machine Control) and
ADC (Automatic Dynamic Control) =
Load-dependent speed control
- Standard color RAL 3020 traffic red -
all cylinders painted black
- Load hook and fixing brackets (short / 500mm)
- Transport position: folded transverse to the direction of travel
- Attention: Observe vehicle electrical system / 12V or 24V, standard 24V
- FASSI stability control FSC-S/II
- IE742 terminal box
Rcjdsxb Hw Nspfx Aa Seh
- Prepared for operation with variable displacement pump (LS)
- Proportional

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。