卡车装载式起重机

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Tatra Phoenix 41.500 8x8 All-Wheel Drive with Fassi Crane with Jib and Winch
New vehicle with day registration 06/2025
Long-haul driver cab

Rcsdjxb Hwvepfx Aa Sjh
Removable flatbed
Usable as a tractor unit

* Model: TATRA PHOENIX
* Drive: 8X8/6, last axle driven and steered, AP-axles
* Engine: MX13, 390 kW (530 Hp) 1675 rpm 2500 Nm
* 1000 - 1425 rpm
* Transmission: Automated ZF TraXon 16TX2640, 16 speeds
* Steering: Left-hand drive
* Cabin: Long-haul cab, H3279WHTE
* Gross vehicle weight: 41,500 kg
* Long-haul cab
* Side fenders
* External sun visor (green, translucent)
* Non-heated windshield
* No side/rear windows
* Electrically adjustable mirrors
* Convex mirror
* With front curb mirror
* Central locking with remote control, 2 keys
Cabin - interior:
* Luxury Air
* Storage compartment below dashboard, long
* Standard mattress on lower sleeper berth
* Raised lower bed by 250 mm (sleeper cab, storage space 260 liters)
* No upper bed (Long cab)
* Trailer couplings without center section
* Cool box/refrigerator (sleeper cab)
* Manual aluminum roof hatch
* Cab air conditioning controls
* Dashboard - Black Rock
* Cabin wall paneling, textile
* Interior trim color "DARK SAND"
* Immobilizer 5 minutes SCM BV03-B1
* Standard auxiliary power outlet
Communication and driver management:
* ALPINE communication system with camera
* Antennas: AM/FM + 2x GSM + GPS
* Digital tachograph
* Cruise control
* Toll pre-installation (Germany only)
Wheels:
* Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed use
* Spare wheel mounted on frame in transport position
Powertrain:
* MX13, 390 kW (530 Hp) 1675 rpm 2500 Nm
* 1000 - 1425 rpm
* ZF 16TX2640TO TraXon, Engine MX13 (355 kW, 390 kW)
* 2-speed gear ratio 2.30 TRK 0.61/1.44 H8, downshiftable from standstill
Chassis:
* Driven axles, axle capacity 10t, small wheels
* 8X8/6

Crane:

- Type: F710RA.2 xhe-dynamic
- Endless slewing range
- All hydraulic cylinders double-acting
- Piston rods hard-chromed
- Twin link system with PROLINK (articulated jib extendable up to 10 degrees)
- Electronic overload protection with FX900
- FASSI stability control FSC-SII incl. LMB II
- Emergency stop and optical alarm (at 90% and 100%)
- Pressure limiting and load-holding valves
- XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift)
- RCH or RCS FASSI radio remote control with linear levers and
pressure display (bar and %) and 90% + 100% warnings on display
- Danfoss D900 control valve block with 4 control valves
mounted on crane column
- Emergency operation for crane controls
- High-pressure filter supplied piped
- Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base
- Hydraulic outriggers, extendable on both sides, outrigger width 8.29 m
- Outriggers operable via radio (black/white)
- IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) =
Load-dependent speed control
- Standard color RAL 3020 traffic red, all cylinders painted black
- Load hook and mounting clamps (short / 500mm)
- Transport position: folded crosswise to the direction of travel
- Note: Observe on-board voltage / 12V or 24V, standard 24V
- FASSI stability control FSC-S/II
- IE742 connection box
- Set up for operation with variable displacement pump (LS)
- Proportional

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。