压块机

RUF Serie R2

one machine directly available

*Prior sale expressly reserved
*Round silo at extra charge

Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction

Hydraulic briquetting press for rectangular briquettes
Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³.

+ 24h operation possible
+ Longevity
+ Low maintenance costs
+ Compact structure
+ High energy efficiency thanks to innovative hydraulics
+ 25 years of experience
.
* depending on the bulk weight of your raw material
* based on a bulk weight of 200 kg per cubic meter
Detailed information after a successful test with your material
.
Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases
Oil cooler: 2.2 kW
Agitator: 0.55 kW
Screw: 1.5 kW
.
Hopper: 400x800mm
Capacity of approx. 150 liters
.
Soft start for hydraulic motor
Siemens PLC S7-1200
.
Auto start and stop via a light barrier integrated in the feed hopper
Up to 560 briquettes per hour
.
Specific pressing pressure: 1,700 kg / cm²
Up to 300 bar pressing pressure
Briquette format 150x60 mm
Briquette length: 40 to 110 mm (adjustable)
Dimensions: 2.9 x 2.0 x 2.1 m
Weight: 3,800 kg.
600 liter hydraulic oil tank
The control is designed for operation from + 10 degrees to +35 degrees
Hedpfx Ajgbpm Tji Djt
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 15%
- Maximum chip length: 20 x 2 x 2 mm
- Installation temperature: temperature-controlled room at at least + 8 ° C
Otherwise, we recommend heating for an extra charge
- The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.