自动喷漆房ROMER Automat
Automatic spray booth
自动喷漆房
ROMER Automat
Automatic spray booth
出厂年份
2020
状况
全新
位置
Skarżysko-Kamienna 

基本数据
价格和位置
- 位置:
- ul. Rejowska 99, 26-110 Skarżysko-Kamienna, Polska

拨打
优惠详情
- 广告编号:
- A4881102
- 更新:
- 最近更新时间为 17.05.2024
描述
Use of one photocell
Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating.
Vertical detection of the detail of the workpiece.
Iedpfefy T Arex Ag Hebd
The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece.
Application of light gates with multiple sensors horizontally and vertically.
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators.
Benefits of using gates and photocells
The benefits of using photocells or light gates are primarily energy and powder savings.
Eliminate painting of a zone in which there is no detail.
With the use of light gates, precise control of the guns.
Our lines can be optionally equipped with photocells, or light gates
Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings
Eliminate painting of a zone in which there is no detail
With the use of light gates, precise control of the guns
The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.
Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating.
Vertical detection of the detail of the workpiece.
Iedpfefy T Arex Ag Hebd
The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece.
Application of light gates with multiple sensors horizontally and vertically.
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators.
Benefits of using gates and photocells
The benefits of using photocells or light gates are primarily energy and powder savings.
Eliminate painting of a zone in which there is no detail.
With the use of light gates, precise control of the guns.
Our lines can be optionally equipped with photocells, or light gates
Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings
Eliminate painting of a zone in which there is no detail
With the use of light gates, precise control of the guns
The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2020
96 在线广告
发送询价
电话 & 传真
+48 41 23... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
德国
7,232 km
喷砂机
Peenmatic1800 SDK
Peenmatic1800 SDK
成功
您的消息已发送。
小广告
Reiden
7,597 km
钻铣床
FehlmannPicomax 54
FehlmannPicomax 54
成功
您的消息已发送。
小广告
Goldenstedt
7,272 km
折弯机 - 液压
FISCHERDAP 5 /1500
FISCHERDAP 5 /1500
成功
您的消息已发送。
小广告
Bühl
7,507 km
工具铣床 - 通用
MAHOMH 800
MAHOMH 800
成功
您的消息已发送。
小广告
Dortmund
7,399 km
燃气式预热炉
VEI-EngineeringVEI_KO_V_GB_400-350
VEI-EngineeringVEI_KO_V_GB_400-350
成功
您的消息已发送。
小广告
Most Na Soci
7,267 km
台式抛丸机 DB 1200x500
Siapro d.o.o.DB 1250x500, 1x7.5kW
Siapro d.o.o.DB 1250x500, 1x7.5kW
成功
您的消息已发送。
小广告
Cantù
7,604 km
双横切锯
SML - ITALYSILVER P 35/EL
SML - ITALYSILVER P 35/EL
成功
您的消息已发送。
小广告
Hessisch Lichtenau
7,276 km
带有 HEIDENHAIN TNC 155 数控系统的数控通用坐标钻铣床,钻床,铣床
FEHLMANNPICOMAX 100-CNC 3
FEHLMANNPICOMAX 100-CNC 3
成功
您的消息已发送。
小广告
Luckenwalde
7,019 km
⭐ 电动粉末烘箱 |3米| 42 千瓦 ⭐
ProtonMATOVENB-151830
ProtonMATOVENB-151830
成功
您的消息已发送。
小广告
Deskle
7,281 km
喷砂机组
COGEIMPG 10x15
COGEIMPG 10x15
您的广告已成功删除
发生错误


















































































