风冷式除湿机Proton
ME-LINE
风冷式除湿机
Proton
ME-LINE
狀況
全新
位置
Luckenwalde 

顯示圖片
显示地图
价格和位置
- 位置:
- Anhaltstraße 30, 14943 Luckenwalde, Deutschland

撥打
优惠详情
- 產品ID:
- A9010448
- 最後更新:
- 於 21.02.2025
描述
ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above.
EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC.
Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface.
Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting.
Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions.
Each Proton dehumidifier is built to the highest quality standards and comes with regional certification.
The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity.
The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:
•Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air.
•Avaliable in pre-cooled and after-cooled versions for warm climates.
•Robust design with steelframe, eyebolts etc.
•Vital parts can easily be maintained and exchanged.
•Large air inlet grills and filters.
•Can be built into containers for protection.
Podpjkw Ukuofx Advord
•Adjustable dehumidifying capacity and outlet air temperature in 4Grades.
•Outdoor and indoor use.
•Dry air pressure up to 1200 Pa.
Technical. Spec.:
Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.
EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC.
Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface.
Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting.
Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions.
Each Proton dehumidifier is built to the highest quality standards and comes with regional certification.
The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity.
The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:
•Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air.
•Avaliable in pre-cooled and after-cooled versions for warm climates.
•Robust design with steelframe, eyebolts etc.
•Vital parts can easily be maintained and exchanged.
•Large air inlet grills and filters.
•Can be built into containers for protection.
Podpjkw Ukuofx Advord
•Adjustable dehumidifying capacity and outlet air temperature in 4Grades.
•Outdoor and indoor use.
•Dry air pressure up to 1200 Pa.
Technical. Spec.:
Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.
这些广告您可能也感兴趣。
小广告
Großenlüder
7,318 km
喷砂设备,压力式喷砂柜
Oliver Fritz GmbH & Co. KGDSK 15.15.20. RSB75
Oliver Fritz GmbH & Co. KGDSK 15.15.20. RSB75
小广告
Deskle
7,281 km
翻斗式橡胶带抛丸机
OMSGSG 8
OMSGSG 8
小广告
Privalj
7,138 km
奶及奶制品的生产
gea pasterizator
gea pasterizator
小广告
Dreieich
7,400 km
喷砂机
KLEIN (Druckstrahlanlage)DS 1250
KLEIN (Druckstrahlanlage)DS 1250
小广告
Stuttgart
7,429 km
精细爆破装置(喷射器)
sandmaster AGFINE-BLASTER FB 1
sandmaster AGFINE-BLASTER FB 1
小广告
Großenlüder
7,318 km
过滤系统 萃取系统
Oliver Fritz GmbH & Co. KGFilteranlagen
Oliver Fritz GmbH & Co. KGFilteranlagen
小广告
Mezőszemere
6,726 km
奶酪切丝机
GrobaKKR-300/2
GrobaKKR-300/2
小广告
Tatabánya
6,880 km
叉车卡特彼勒 V250
Caterpillar #3226V250
Caterpillar #3226V250
小广告
爱尔兰
8,198 km
Siat 半自动封箱机
SiatSR20
SiatSR20
小广告
Dianalund
6,961 km
托盘翻转机/托盘更换器
ToppyMobile / stationary
ToppyMobile / stationary
您的广告已成功删除
发生错误






























































































