立式加工中心PRIMINER
VF 1300
技术细节
- X轴行程:
- 1,300 毫米
- Y轴行程:
- 650 毫米
- Z轴移动距离:
- 600 毫米
- 控制器型号:
- Heidenhain TNC-460
- 主轴速度（最大）:
- 15,000 转/分
提供
- 位置:
- Bayern, 德国
– 距离：约 7,179 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
Machine with only 187 spindle hours!
The new price of the machine was approximately €140,000 in 2023!
No tools or a vise are included. However, these can be acquired upon request.
TECHNICAL DETAILS
Travel X-axis: 1,300 mm
Travel Y-axis: 650 mm
Travel Z-axis: 600 mm
Spindle speed: 15,000 rpm
Main spindle servo motor Siemens: 20/53 kW
Main spindle servo motor Fanuc: 15/30 kW
Spindle taper: SK 40
Work table
Table dimensions: 1,500 × 650 mm
Table load: max. 1,200 kg
T-slots: 18 × 5 × 100 mm
Distance spindle to table surface: 150–750 mm
Distance spindle center to Z-axis cover: 697 mm
Rapid traverse X/Y-axis: 36 m/min
Rapid traverse Z-axis: 36 m/min
Working feed rate: max. 1–12,000 mm/min
Feed motors X/Y/Z: 3.2/3.2/4.3 kW
Torque of feed motors X/Y/Z: 20/20/27 Nm
Tool positions: 28
Tool length: max. 300 mm
Tool diameter: max. 75 mm
Tool diameter with free adjacent positions: max. 125 mm
Tool weight: max. 8 kg
Tool change time: 1.6 s
MACHINE DETAILS
Control system: Heidenhain TNC-460
Accuracy without linear glass scales
Positioning accuracy over the entire travel range: 0.012 mm
Repeatability accuracy over the entire travel range: 0.008 mm
Accuracy with linear glass scales
Positioning accuracy over the entire travel range: 0.008 mm
Repeatability accuracy over the entire travel range: 0.006 mm
Cooling and power supply
Coolant tank volume: 250 l
Coolant flow rate: 40 l/min
Mains voltage: 400 V ± 10 %
Number of phases: 3
Mains frequency: 50 Hz
Connected load: 85 kVA
Dimensions and weight
Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm
Weight: 8,000 kg
Operating hours
Spindle hours: 187 h
Machine operating hours: 773 h
Control operating hours: 1,165 h
EQUIPMENT
Direct drive
Double-arm tool changer
O-BLUM tool measuring system Lasercontrol NT
O-BLUM workpiece measuring system TC50
Electronic handwheel (MPG)
Tapping without draw-in collet
USB interface
CF card interface
Ethernet interface
HIWIN linear guides with roller guides in all axes
HIWIN ball screw drives
Directly driven main spindle
NSK/FAG main spindle bearings
Separate oil-air spindle cooling unit
Fully enclosed tool changer for protection against chips
Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop
Fully enclosed splash guard
Separate air conditioning system for heat dissipation
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22322102
- 参考编号:
- AUC-2607110
- 更新:
- 最近更新时间为 13.07.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。