型腔电火花机床 (EDM)

OPS INGERSOLL GANTRY 1200 HSJ / 64 bit Generalüberholt

Status: completely overhauled
Control system: Mitsubishi - 64-bit CNC
Generator power: 70 Amps - multipulse
Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm
Electrode changer: 30-position pick-up plate changer
Work tank (W x D x H): 1770 x 1270 x 680 mm
Workpiece clamping table (W x D): 1640 x 1140 mm
Load capacity: 7,500 kg
Accessories:
- CO2 fire extinguishing system
- Cartridge filter system
- HSJ technology (High Speed Jump)

The OPS INGERSOLL wire EDM machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good condition, both technically and visually.

During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected.

The following overhaul work was performed on the above-mentioned machine:

Replacement of the ball screw and ball bearings of the X, Y, and Z axes.
Replacement of all (4) ball screws of the tank drive.
Inspection and testing of the C-axis for tightness and accuracy.
Geometric inspection of all axes according to the OPS INGERSOLL protocol.
Thorough cleaning of the entire machine base.
Cleaning of the entire work tank, including replacement of the felt wipers.
Complete repainting of the machine.
Overhaul of the dielectric pumps.
Replacement of all hydraulic and dielectric lines.
Replacement of all pneumatic lines.
Cleaning of the control cabinet, generator, and control system.
Nsdpfjzgckvsx Abyjlf
Replacement of all fans and batteries.
Overhaul or replacement of all power supplies, units, and servo amplifiers.
Laser measurement after the machine overhaul.

Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL.

The machine is immediately ready for operation and is ideally suited for reliable production.

该广告为自动翻译，可能存在翻译错误。