CNC 车铣加工中心OKUMA
MacTurn 50
机器数据
技术细节
- 车削长度:
- 1,500 毫米
- 车削直径:
- 580 毫米
- X轴行程:
- 598 毫米
- Y轴行程:
- 230 毫米
- Z轴移动距离:
- 1,660 毫米
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 7,340 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€2,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Travel X-axis: 598 mm
Travel Y-axis: 230 mm
Travel Z-axis: 1,660 mm
Max. turning diameter: 580 mm
Turning length: 1,500 mm
Swing diameter over bed: 610 mm
Swing diameter over cross slide: 580 mm
Main spindle
Main spindle speed range: 12 - 2,800 rpm
Spindle bearing diameter: 150 mm
Spindle bore: 110 mm
Spindle nose: JIS A2-11
Main spindle drive power: 37 (30) kW
C-axis accuracy: 0.001°
Rapid traverse X/Y: 12,000 mm/min
Rapid traverse Z: 20,000 mm/min
Rapid traverse C: 100 rpm
Cutting feed rate: 0.001 - 1,000 mm/rev
Tool turret
Type: H2 ATC
Number of tool stations: 2 (1x L-Tool / 1x M-Tool) pos.
Driven stations: stepless
Speed range - driven tool stations: 40 - 3,000 rpm
Tool shank height: 25 mm
Boring bar diameter: 50 mm
Tailstock
Quill diameter: 120 mm
Quill stroke: 170 mm
Tailstock taper: MT 5
Tool magazine
Number of tool positions: 50 pos.
Tool holder: MAS BT 50
Max. tool diameter: 170 mm
Max. tool length: 350 mm
Max. tool weight: 20 kg
Magazine drive: 3.2 kW
MACHINE DETAILS
Total power requirement: 53 kVA
Dimensions & weight
Installation area: 6.0 x 3.2 x 3.0 m
Machine weight: 18.5 t
Operating hours
Main switch on-time: 79,607 h
NC operating hours: 27,814 h
Main spindle hours: 21,269 h
EQUIPMENT
Chip conveyor
Central coolant system
High-pressure cooling 20 bar
Tailstock
Signal lamp
C-axis
Y-axis
Hydraulic unit
Steady rest
Various tool holders (44 pcs.)
Three-jaw chuck Schunk - ROTA NC 400-120
Electronic handwheel
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A21605008
- 参考编号:
- AUC-2603327
- 更新:
- 最近更新时间为 27.03.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Oelde OKUMAMacTurn 50
挪威 OkumaMacTurn 50 x 1500
Nordrhein-Westfalen OkumaMacTurn 50
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。