压块机

mütek MPP 280

Very robust machine with high pressing force
- is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible.

Our best-selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio

Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later)
* cools the pressing tongs (important from 3.5 hours) and the hydraulic oil
* Cooling device recommended for regular use of more than 3.5 hours at a time.

Briquette diameter: 80 mm
Bedpfx Anexfwdeyslh
Front bush: 125 mm
Briquette stroke max .: 100 mm
Briquette lift opt ​​.: 80 mm
Output (depending on material): up to 200 kg / h *
* depending on the bulk weight
* based on a bulk weight of 200 kg per cubic meter

Motor power: 9.2 kW
400 volts / 50 Hz / 3 phases
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo content: approx. 1 qbm
Pump: 75 liters
Hydraulic pre-compressor
Cooling pressing tongs option: yes, with special accessory coolable pressing tongs
Hydraulic oil cooling option: yes
Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory)
Level monitoring option: yes
Strand briquette option; yes (depending on material)
Option of enlarged filling slide: yes, with special accessory enlarged filling slide
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18%
- Chip length maximum 20 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear