压块机mütek
MPP 180
压块机
mütek
MPP 180
出厂年份
2026
状况
全新
位置
Neckartailfingen 

价格和位置
- 位置:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

拨打
优惠详情
- 广告编号:
- A4041639
- 更新:
- 最近更新时间为 28.01.2026
描述
Availability upon request.
Very robust machine with high pressing force.
- Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible.
Our best-selling briquetting press series:
+ Proven, simple technology for extremely low failure rates.
+ 25 years of experience, continuous development, and know-how.
Bdedpfx Aqjd Nm Sijxsf
+ Several thousand machines in operation with satisfied customers.
+ Excellent price-performance ratio.
Additional cost for demonstration cooling unit: €4,980 net.
(can also be retrofitted later)
* cools the press tongs (important after 4 hours) and the hydraulic oil.
* Cooling unit recommended for regular operation of more than 4 hours at a time.
Commodity code: 84793010,
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Briquette stroke max.: 100 mm,
Briquette stroke opt.: 80 mm,
Capacity (material-dependent): up to 150 kg/h*
* depending on the bulk density,
* based on a bulk density of 200 kg per cubic meter.
Motor power: 9.2 kW,
400 Volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil volume: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Optional cooling for press tongs: yes, with special accessory - coolable press tongs
Optional cooling for hydraulic oil: yes
Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory)
Optional level monitoring: yes
Optional strand briquette: yes (material-dependent)
Optional enlarged feed slide: yes, with special accessory - enlarged feed slide
CE compliant
Requirements for the raw material:
- The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%.
- Chip length max. 20 mm
- Installation temperature: temperature-controlled room with a minimum of +5°C
- The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.
该广告为自动翻译,可能存在翻译错误。
Very robust machine with high pressing force.
- Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible.
Our best-selling briquetting press series:
+ Proven, simple technology for extremely low failure rates.
+ 25 years of experience, continuous development, and know-how.
Bdedpfx Aqjd Nm Sijxsf
+ Several thousand machines in operation with satisfied customers.
+ Excellent price-performance ratio.
Additional cost for demonstration cooling unit: €4,980 net.
(can also be retrofitted later)
* cools the press tongs (important after 4 hours) and the hydraulic oil.
* Cooling unit recommended for regular operation of more than 4 hours at a time.
Commodity code: 84793010,
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Briquette stroke max.: 100 mm,
Briquette stroke opt.: 80 mm,
Capacity (material-dependent): up to 150 kg/h*
* depending on the bulk density,
* based on a bulk density of 200 kg per cubic meter.
Motor power: 9.2 kW,
400 Volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil volume: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Optional cooling for press tongs: yes, with special accessory - coolable press tongs
Optional cooling for hydraulic oil: yes
Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory)
Optional level monitoring: yes
Optional strand briquette: yes (material-dependent)
Optional enlarged feed slide: yes, with special accessory - enlarged feed slide
CE compliant
Requirements for the raw material:
- The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%.
- Chip length max. 20 mm
- Installation temperature: temperature-controlled room with a minimum of +5°C
- The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 711 5... 广告
这些广告您可能也感兴趣。
小广告
Grońsko
6,818 km
四面刨
WEINIGprofimat 23 fortec
WEINIGprofimat 23 fortec
小广告
San Giovanni Al Natisone
7,300 km
倒角机/销钉切割机
LöserAA220
LöserAA220
小广告
Salzburg
7,234 km
铣削木材的包装分离
VKM
VKM
小广告
Gerolzhofen
7,302 km
抽吸装置
SCHUKOVacomat 300
SCHUKOVacomat 300
小广告
Soerendonk
7,524 km
哈默米尔
van Randwijks500 x 700
van Randwijks500 x 700
小广告
Prešov
6,625 km
锯末滚筒干燥机
Avantis400kg/hod
Avantis400kg/hod
小广告
Besigheim
7,422 km
双斜切锯
WegomaDS140
WegomaDS140
小广告
Roreto
7,752 km
自动镗孔机
WEEKE (HOMAG Group)PROFI BST 800
WEEKE (HOMAG Group)PROFI BST 800
小广告
Gerolzhofen
7,302 km
推台锯
ALTENDORFF45
ALTENDORFF45
小广告
Achern
7,516 km
指接压机(Keilzinkpresse)
DIMTER10 t
DIMTER10 t
您的广告已成功删除
发生错误








































































































