移动式喷砂机

Landreko SBM-60-13

Hopper capacity: 60l / 300 kg
Degree of cleanliness: SA-3.0 (deep and extensive corrosion)
Air requirement: 1,000 l/min (for 4.0 mm nozzle)
Abrasive valve: FSV Premium
Nominal operating pressure: 13 bar
Operating temperature: -20 - 100 °C
Cleaning performance: up to 19 m2/h
Supported nozzle diameters: from 2 to 15 mm
Weight: 65 kg
The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size.

Gbsdpfx Aowrza Njd Hek
The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model).

The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra).

The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

该广告为自动翻译，可能存在翻译错误。