冷藏半挂车

LAMBERET SR2 Greenliner Thermoking 1280 Std. neuwertig

Lamberet SR2 Greenliner THERMO KING SLXi-300 50 refrigeration unit, 1,280 operating hours, THERMO KING TouchLog temperature recorder, lifting axle, SAF axles, pallet box, ATP certificate valid until 2027, FRC 2027, first ownership, as new, excellent maintained condition.

Build Description:

Body dimensions: Interior: 13,390 mm x 2,500 mm x 2,650 mm
Saddle height: 1,150 mm

Body equipment:
SL-Y version: Through-loading width 2.50m; vertical aluminum reinforcements every 305mm / roof 85mm with aluminum reinforcements every 610mm, semi-recessed skirting boards.

Unladen coupling height (horizontal): 1,150 mm - R65 tires
Kjdpsymgpqefx Ac Hswu
Interior height: 2.65 m
Side walls inside: polyester with vertical aluminum reinforcements every 305 mm
Checkerplate aluminum floor welded to skirting boards forming a floor pan

Despite taking the utmost care, errors in this listing cannot be completely excluded. Errors and prior sale are reserved!

Aluminum-anodized rear frame with fully swiveling wing doors, one locking bar per wing - 4 double-action recessed aluminum hinges, aluminum protective strip (270 mm) at the base of the rear doors inside. Upper rear lighting "SAFELIGHT Full LED" integrated into the rear buffer, consisting of:
- 2 scrolling indicator lights
- 2 multifunction lights (outline/brake light)
- 2 work lights.
Standard seal closure, without customs seal approval.
1 row of recessed steel combination anchor rails (only thickness of material protrudes), height floor to center of rail approx. 900mm
4 high-performance LED interior lights with "daylight" effect, installed offset; interior light switch located at the front on the bulkhead connection bracket
Reflective tape: Red along the rear frame contour and white along the lower edge profile of the side walls (EU Directive)
Smooth white gelcoat finish (similar to RAL 9003)
Bulkhead preparation for vertically mounted flat refrigeration unit, with cut-out
Aluminum fuel tank 240 liters, with right and left filling, installed between the support legs.
Universal nozzle with optimized shapes to direct and accelerate air from the outlet + central duct immediately catching the airflow. Patented IAFO (Internal Air Flow Optimizer) open airflow system directs air with minimal load loss to the rear of the vehicle.
Galvanized protective grille on the inside of the front wall. 11 rubber bumpers mounted on the aluminum skirting. 2,300 mm x 1,500 mm.
Front chassis module GL08, flat structure 8 mm thick, combined with floor, developed to optimize vehicle overall height and withstand heavy frontal loads.
3-axle SAF INTRADISC+ INTEGRAL unit - brake disc Ø430 mm - offset 120 mm - track width 2,090 mm
6 CONTINENTAL tires - Regional HT3 pattern - 385/65 R22.5
6 steel rims
Wheelbase 7.45 m (compatible with first axle liftable, EU directive compliant)
Automatic lift axle, switchable, first axle
EBS WABCO 2S/2M (on center axle) incl. ESS stability aid. Supply via ISO 7638 connector
24V supply with 1 x 15-pin socket (ISO 12098) 99334 Amt Wachsenburg
2 x HELLA Modular HYBRID tail lamps/LED, LED outline lamp, on aluminum-anodized mounting plates with rear protection
Front fifth wheel plate extensions as standard, protect the underside of the CX profile, with intermediate rubber plate to absorb coupling/uncoupling impacts
Anodized aluminum closing plate between longitudinal beams at the rear, including license plate lighting, roll...

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。