ZBS 型双砂带磨削机Kuhlmeyer
ZBS 3Ex
ZBS 型双砂带磨削机
Kuhlmeyer
ZBS 3Ex
EXW 固定价格 不含增值税
€139,000
出厂年份
2022
状况
展品机
位置
Piaseczno 

显示图片
显示地图
机器数据
价格和位置
EXW 固定价格 不含增值税
€139,000
- 位置:
- Mazurska, 18, 05-500 Piaseczno, Polska

拨打
优惠详情
- 广告编号:
- A16565521
- 更新:
- 最近更新时间为 29.07.2025
描述
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
Fpsdpfx Ast Hvkved Hof
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
该广告为自动翻译,可能存在翻译错误。
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
Fpsdpfx Ast Hvkved Hof
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2019
3 在线广告
发送询价
电话 & 传真
+48 22 42... 广告
这些广告您可能也感兴趣。
小广告
Enschede
7,399 km
圆形折弯机
OSTASSM 700 x 76
OSTASSM 700 x 76
小广告
Mudersbach
7,403 km
三辊折弯机
FastechFRM 1050 x 90
FastechFRM 1050 x 90
小广告
Allendorf (Eder)
7,350 km
长带砂光机
KBM Maschinenbau GmbHMS93-150
KBM Maschinenbau GmbHMS93-150
小广告
Hódmezővásárhely
6,794 km
平面磨床
Made in TaiwanAM1545 AH
Made in TaiwanAM1545 AH
小广告
Allendorf (Eder)
7,350 km
长带砂光机
KBM Maschinenbau GmbHM2S92-150
KBM Maschinenbau GmbHM2S92-150
小广告
Kassel
7,284 km
其他
FendtFormer 14055 PRO Gen 2
FendtFormer 14055 PRO Gen 2
小广告
Bad Oeynhausen
7,279 km
抛光台
KuhlmeyerPSK
KuhlmeyerPSK
小广告
Thurmaston
7,831 km
立式加工中心
HaasVF-5/40XT
HaasVF-5/40XT
您的广告已成功删除
发生错误




































































