注塑机

KraussMaffei KM 160-750 CX

Injection Moulding Machine – Krauss Maffei KM 160-750 CX
Year of manufacture: 2025

Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with colour touchscreen display.

Plasticising Unit

Complete plasticising unit for thermoplastics, screw diameter 50 mm, with check valve and open nozzle
Nozzle radius: 10 mm
Nozzle orifice: 4 mm

Technical data (standard version)
Nlodpfx Akjxdd N Uensa

Clamping Unit

Clamping force: 1,600 kN
Opening force: 86 kN
Platen dimensions (H x V): 820 x 845 mm
Tie bar spacing (H x V): 520 x 520 mm
Opening stroke: 650 mm
Minimum mould height: 300 mm
Maximum daylight: 950 mm
Ejector stroke: 150 mm
Ejector force front/rear: 23 / 10 kN

Injection Unit

Screw diameter: 50 mm
L/D ratio: 20.2
Injection pressure: 1,892 bar
Shot volume: 393 cm³
Shot weight (PS): 357 g
Injection speed: 90 mm/s
Injection rate (standard): 177 cm³/s
Screw speed (standard): 265 rpm

Electro-hydraulic System

Pump motor power: 22 kW
Installed heater power: 15.5 kW
Dry cycle time according to Euromap 6: 2.1 s
Oil tank capacity: 400 l

Linear Robot – Krauss-Maffei LRX 100

Payload < 10 kg (gripper + drives + parts)
Part removal on operator-offside
Axes:
X-axis (from mould): 620 mm, servomotor
Y-axis (vertical, with brake): 1,200 mm, servomotor
Z-axis (crosswise): 1,500 mm, servomotor

Dimensions and Weight

Net weight (with control cabinet): 6.10 t
Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

该广告为自动翻译，可能存在翻译错误。