悬臂架Kragarmregal einseitig Höhe: 4.200 mm
Nutztiefe: 1.200 mm / Länge: 4.000 mm
悬臂架
Kragarmregal einseitig Höhe: 4.200 mm
Nutztiefe: 1.200 mm / Länge: 4.000 mm
VB 不含增值税
€1,990
出厂年份
2024
状况
二手
位置
Bad Feilnbach 

机器数据
价格和位置
VB 不含增值税
€1,990
- 位置:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

拨打
优惠详情
- 广告编号:
- A10718852
- 更新:
- 最近更新时间为 28.01.2025
描述
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth
Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length)
Fastening material (screws, nuts and washers)
- (*No paint damage!)
- (*No damaged components!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 50 racks in stock)
Ppsdpfsmidyfex Aiuet
Net price: €1,990.00 plus VAT
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Surface painted in RAL 5010 (gentian blue)
- Rack height 4,200 mm
- Load capacity per stand 2,200 kg
- Base and cantilever arms with 1,200 mm usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 730 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
Delivery can take place in approx. 1 - 2 weeks after receipt of the order.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained.
The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.
该广告为自动翻译,可能存在翻译错误。
Scope of delivery:
4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth
12 cantilevers with 1,200 mm usable depth
Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length)
Fastening material (screws, nuts and washers)
- (*No paint damage!)
- (*No damaged components!)
- (*Reorder spare parts and extension possible at any time)
- (*Offer available in larger quantities: approx. 50 racks in stock)
Ppsdpfsmidyfex Aiuet
Net price: €1,990.00 plus VAT
Detailed description:
- Stable steel construction made of IPE profiles (screw system)
- Surface painted in RAL 5010 (gentian blue)
- Rack height 4,200 mm
- Load capacity per stand 2,200 kg
- Base and cantilever arms with 1,200 mm usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 730 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are manufactured exclusively in Germany.
We offer reliable freight with registration before delivery.
The material is sensibly packed to enable easy unloading.
Delivery can take place in approx. 1 - 2 weeks after receipt of the order.
When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained.
The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 8064 ... 广告
这些广告您可能也感兴趣。
小广告
Bad Feilnbach
7,303 km
重型货架
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
小广告
德国
7,013 km
销钉钻孔机
WeekeOptimat ABD 150
WeekeOptimat ABD 150
小广告
Friedrichsdorf
7,391 km
全地形叉车
ManitouMH 25-4 Allrad
ManitouMH 25-4 Allrad
小广告
Dinkelsbühl
7,346 km
按刹车
Dener AbkantpresseXL30320
Dener AbkantpresseXL30320
小广告
Oberleichtersbach
7,318 km
筛分厂
UnbekanntDoppeldecker Siebmaschine
UnbekanntDoppeldecker Siebmaschine
小广告
Birmingham
7,887 km
文件夹
RAS62.25
RAS62.25
小广告
Helmstedt
7,146 km
带喂料机和微调器的鞍装订
Müller MartiniPresto
Müller MartiniPresto
小广告
Dnipro
5,673 km
滚压成型生产线
LLC EvolutionerMPF-1 fence machine
LLC EvolutionerMPF-1 fence machine
小广告
Minareliçavuş
6,411 km
便携式仿形铣床
PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİSÇ 551
PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİSÇ 551
小广告
Helmstedt
7,146 km
带喂料机和微调器的鞍装订
Müller MartiniPrima Amrys
Müller MartiniPrima Amrys
您的广告已成功删除
发生错误


























































































