卧式内拉床

Karl Klink RW 25 x 2000

General / technical data:
used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design
clearing stroke: 2.000mm
Tractive force: 25,000 kg (250KN)
Mounting in the drawbridge: Ø 105mm Cylindrical
Through-hole in the clamping table: Ø 125mm
Workpiece clamping surface: 440mm x 440mm
Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder)
Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min
Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min
Oil volume: hydraulics approx. 450L / coolant approx. 100L
Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area)
Power supply: 380Volt 50 HZ
Connected load: 19kw
Equipment:
- the machine has a mechanical hydraulic control for the clearing & return stroke
- the machine has an integrated coolant system
- the machine has a manually operated tool feed system
- The broaching carriage with the pulling head holder is guided flat on both sides.
- The machine has an adjustable tractive force limiter
- Tractive force display


Accessories
- 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm
Bcedpfotuuvzex Ad Isw
- dividing head (see pictures)
- Various special fixtures and clamping devices
- Machine documentation



Remarks:
The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching.
In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools.
The machine is used and is in good condition for its age.
The machine is available for inspection in our warehouse.
The machine is new in our stock and is currently not technically or visually refurbished.
Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。