作业平台半挂车

KÖGEL Multi Chassis. Rungen

Frame
* Standard ladder-type frame of lightweight steel construction with cross members inserted through the frame
* With camber (pre-camber) in the chassis frame
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin compliant with DIN 74080 / ISO 337

Running Gear
* For indivisible loads, an increase in the total towing weight is permitted
* Axle lift mechanism on axle 1; control of axle lift fully automatic, load-dependent
* Make: Kögel (or as specified by customer)
* Tri-axle assembly with disc brakes, diameter approx. 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm of travel

Vehicle Tires
* Wheels with internal sensors in compliance with UN ECE R141
* 6 x 385/65 R 22.5 UNIROYAL TH 50 tires
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments
* Landing legs (make as specified by customer, Kögel) mechanical, with compensating foot, lifting capacity approx. 24 t. Single-sided operation, right side in direction of travel
* Spray suppression system in accordance with (EU) Regulation No. 109/2011
* 1 pair of quarter-circle mudguards in front of the axles
* 1 pair of straight mudguards with spray flaps between the 1st and 2nd axles
* 1 pair of quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holder
* Side underrun protection to ECE-R73
* 2 plastic toolboxes, waterproof, internal dimensions approx. 545 x 400 x 400 mm. Mounted at the rear, 1x left and 1x right
* Retractable access ladder at rear right
* Tall, rigid under-run protection at the rear made of steel to ECE-R58
* 1 pair each of extendable warning signs for oversize loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Positioned at the front and rear of the vehicle

Brake / Air Suspension System
* 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-actuated brake, external pneumatic connections, and external EBS diagnostic connector via ISO 7638 plug
* EBS system (make as specified by customer, Kögel)
* Air suspension system incl. 1 lift and lower valve, installed on the left in direction of travel, behind the axle assembly. Driving position self-adjusts automatically
* 2 non-interchangeable coupling heads in front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)

Floor
* Floor plates approx. 30 mm thick
* Floor all around with sealed joints
* Stake pockets for square insert stakes approx. 80 x 80 mm, arrangement as per drawing J9: 8 stake pocket strips (18 stake pockets per strip: 4 outside + 10 in the middle per strip)

Front Wall
* Storage for max. 14 square insert stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing capacity approx. 1,000 kg per ring) on the front wall as per EN 12640

Side Wall
* VarioFix steel slotted external frame
* 24 pairs of lashing rings in the external frame (to EN 12640), permissible lashing capacity approx. 5,000 kg per ring

Bumper Protection
* 1 pair of steel buffer bumpers approx. 160x85x85 mm mounted outside on rear frame end plate
* Cross member steel angle galvanized as forklift protection and central lock cam protection, mounted on rear frame end plate

Electrical / Electronics
* Steel light
Gsdjxcdmqjpfx Adrouh

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。