折弯机Jutec Biegesysteme GmbH & Co. KG
Biegesystem 6000 SB/D
折弯机
Jutec Biegesysteme GmbH & Co. KG
Biegesystem 6000 SB/D
出厂年份
2026
状况
全新
(完全功能)
位置
Limburg an der Lahn 

基本数据
价格和位置
- 出租:
- 可能
- 位置:
- Robert-Bosch-Straße 8, 65549 Limburg an der Lahn, Deutschland

拨打
技术细节
尺寸和重量
总重量:
120 千克
总长度:
500 毫米
总宽度:
700 毫米
总高度:
1,000 毫米
安全特性
紧急停止
优惠详情
- 广告编号:
- A11721341
- 更新:
- 最近更新时间为 06.11.2026
描述
THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY.
The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive.
Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation.
For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.
With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result.
The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes.
Ksdpfxeng Ax Sj Appjnd
With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment.
POSSIBLE AREAS OF APPLICATION:
- Plant engineering- Hydraulic piping
- Meander bending- prototyping- Sanitary and heating construction
TECHNICAL DATA:
Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V
Bending capacity 6000D: Ø 6 to 60 x 4 mm
Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V
Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V
- Bending radius min/max: 36 mm/280 mm
- Optional large bending radii up to 500 mm
- Multifunction machine control Bending angle adjustment (0.1°)
- Maximum bending angle 240
- Hexagonal shaft 40 mm for quick tool change
- Safety foot switch with emergency stop
- Weight 110 kg
OPTIONAL ACCESSORIES:
- Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm
- Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit.
- Small bending device KBV
- Special tool according to specification
OUR SERVICE FOR YOU ON SITE:
- Welcome to the test production in our house in the demo room
- Consultation-information meeting at your site
- Consultation and handling as leasing/financing purchase via
- Service contracts, maintenance at your site
The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive.
Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation.
For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.
With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result.
The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes.
Ksdpfxeng Ax Sj Appjnd
With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment.
POSSIBLE AREAS OF APPLICATION:
- Plant engineering- Hydraulic piping
- Meander bending- prototyping- Sanitary and heating construction
TECHNICAL DATA:
Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V
Bending capacity 6000D: Ø 6 to 60 x 4 mm
Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V
Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V
- Bending radius min/max: 36 mm/280 mm
- Optional large bending radii up to 500 mm
- Multifunction machine control Bending angle adjustment (0.1°)
- Maximum bending angle 240
- Hexagonal shaft 40 mm for quick tool change
- Safety foot switch with emergency stop
- Weight 110 kg
OPTIONAL ACCESSORIES:
- Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm
- Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit.
- Small bending device KBV
- Special tool according to specification
OUR SERVICE FOR YOU ON SITE:
- Welcome to the test production in our house in the demo room
- Consultation-information meeting at your site
- Consultation and handling as leasing/financing purchase via
- Service contracts, maintenance at your site
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2023
10 在线广告
发送询价
电话 & 传真
+49 6431 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Rödermark
7,395 km
电工水利联合大学弯曲中心
INDUMASCHV 15
INDUMASCHV 15
成功
您的消息已发送。
小广告
Elz
7,422 km
心轴弯曲机
Sommer MaschinenbauS45
Sommer MaschinenbauS45
成功
您的消息已发送。
小广告
Sinsheim
7,429 km
Coperion K-Tron 干散料喂料机
K-Tron / Coperion GmbHK-ML-FB-130QC (75 Liter)
K-Tron / Coperion GmbHK-ML-FB-130QC (75 Liter)
成功
您的消息已发送。
小广告
Roma
7,571 km
Taurus E 556.P 剪切压机 – 500 吨
TaurusE556P
TaurusE556P
成功
您的消息已发送。
小广告
Bad Oeynhausen
7,279 km
膜压机
FRIZMFP 15/27
FRIZMFP 15/27
成功
您的消息已发送。
小广告
Velen
7,410 km
工具铣床 - 通用
OPTIMUMUF 100
OPTIMUMUF 100
成功
您的消息已发送。
小广告
Bitburg
7,540 km
弯管机
METALLKRAFTRB 54
METALLKRAFTRB 54
成功
您的消息已发送。
小广告
Radeberg
7,016 km
工业齿轮箱 螺旋锥齿轮转向箱
Flender ASUG PENIGTGL 21815 10LA0-280/400x200
Flender ASUG PENIGTGL 21815 10LA0-280/400x200
成功
您的消息已发送。
小广告
Korschenbroich
7,470 km
冷圆锯
KALTENBACHKKS 400 H
KALTENBACHKKS 400 H
成功
您的消息已发送。
小广告
Concordia Sagittaria
7,351 km
带芯弯管机,配有送料装置
ERCOLINATOP 030
ERCOLINATOP 030
您的广告已成功删除
发生错误









































































































