木材干燥用热泵

INCOPLAN XPLAN - HEAT PUMP for WOOD DRYING

XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions.

Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy.

This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved.

XPLAN is available in 3 versions:
LITE, up to 10 m³
STANDARD, with additional fans for tunnel structures
PRO, up to 20 m³ of wood.

Build or purchase your own structure, install and connect XPLAN, and start your drying process.

We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need.

The images show the three versions, with suggestions for the homemade chamber structure and walls.
The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs.

TECHNICAL DATA SPECIFICATION

COMPRESSOR NOMINAL HP
1.5 kW

SHIPPING WEIGHT
154 kg

AUXILIARY HEAT
4 kW
Pjdpfx Aew Ug Atskzera

INTERNAL BLOWER MOTORS
0.25 kW motor; airflow 3,060 m³/h

HEAT TREATING CAPABILITIES
Yes, up to 71° C (only with Heat booster)

CIRCULATING FANS
2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each

POWER REQUIREMENTS
5.8 kW (28A) - 400 V 50 Hz (1-phase)

DIMENSIONS (H X L X W)
94 × 83 × 52 cm (base unit only)

1 power vent system included (includes exhaust and intake)

DRYING TIME

25mm Green Pine - 80% to 8% in approximately 12 days.
25mm Green Oak - 65% to 8% in approximately 35 days.

LOAD CAPACITY

For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³
For slow-drying hardwoods (Oak) 10 m³

NOMINAL WATER REMOVAL RATE

114 kg per 24 hours - 5 l/h

该广告为自动翻译，可能存在翻译错误。