通用加工中心Hamuel Reichenbacher
ECO-RS III-Duo
机器数据
技术细节
- X轴行程:
- 2,320 毫米
- Y轴行程:
- 1,980 毫米
- Z轴移动距离:
- 860 毫米
- 控制器型号:
- Siemens Sinumerik 840D sl
- 主轴速度（最大）:
- 40,000 转/分
提供
- 位置:
- Brandenburg, 德国
– 距离：约 7,026 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
No reserve price – guaranteed sale to the highest bidder!
The original price of the machine was €425,000 plus VAT!
TECHNICAL DETAILS
Travel X1/X2 axis: 2,320 mm
Travel X3/X4 axis: 2,320 mm
Travel Y1/Y2 axis: 1,980 mm
Travel Z1/Z2 axis: 860 mm
Swivel range B1 axis: ±181°
Swivel range B2 axis: ±181°
Rotational range C1 axis: ±361°
Rotational range C2 axis: ±361°
Spindle speed: 40,000 rpm
Tool holder: HSK-E40
Spindle power: 7 kW
Number of spindles: 2
Rapid traverse in X direction: 90 m/min
Rapid traverse in Y direction: 45 m/min
Rapid traverse in Z direction: 90 m/min
Tool capacity: max. 6 units
Tool diameter with 4 tools: max. 40 mm
Tool diameter with 2 tools: max. 240 mm
Tool length from reference surface: max. 270 mm
Tool weight: max. 2 kg
Total weight of all tools: max. 24 kg
MACHINE DETAILS
Control system: Siemens Sinumerik 840D sl
Compressed air supply
Compressed air quality: according to DIN ISO 8573-1
Pressure: min. 7 bar
Air flow rate: approx. 1,000 Nl/min
Voltage: 400 V (±5%)
Frequency: 50 Hz
Electrical connection: 3 phases, neutral and protective conductor
Short-circuit withstand rating Ic: 17 kA
Dimensions & Weight
Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm
Machine weight: approx. 15.0 t
Operating hours
Spindle hours spindle 1: 11,147 h
Spindle hours spindle 2: 11,645 h
EQUIPMENT
Chip conveyor
Hexagon 3D measuring probe
Note: Further technical details can be found in the attached quotation.
Workholding devices and tools are not included in the offer.
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22346742
- 参考编号:
- AUC-2607128
- 更新:
- 最近更新时间为 17.07.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Randers BÜTFERINGOPTIMAT SKO 213/ CC
捷克共和国 TOS KUŘIMFGS 50/63
捷克共和国 TOS KUŘIMFGSV 50
Bergeijk Q-Fin Quality Finishing SolutionsF200XL - VAC
Küssaberg TimesaversSerie-22-1100-WTBTB
Kežmarok BIESSEREGAL 520 - 1350
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。