液压机HACO
PHT 2000T
液压机
HACO
PHT 2000T
出厂年份
2014
状况
二手
位置
Osnabrück 

显示图片
显示地图
价格和位置
- 位置:
- Osnabrück, Deutschland

拨打
技术细节
- 压压力:
- 2,000 t
- 工作台宽度:
- 2,900 毫米
- 桌面长度:
- 5,000 毫米
优惠详情
- 广告编号:
- A21600663
- 更新:
- 最近更新时间为 27.03.2026
描述
Hydraulic Tryout Press
Manufacturer: SCMB
Type: PHT 2000
The machine offered is a hydraulic tryout press.
In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized.
Only components from reputable European manufacturers were used for the overhaul.
A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions.
The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required.
Technical details:
- Pressure: 2000T with ram plate
- Table size: 5000 mm x 2900 mm
- Draw cushion size: 4200 mm x 1800 mm
- Draw cushion stroke: 280 mm
- Draw cushion force: 380T
- Draw cushion load: 4-way regulated draw cushion, no need for balancing
- Table height above floor: 585 mm
- Ram size: 5000 x 2900 mm
- Ram cushion size: 3900 x 1500 mm
- Ram cushion stroke: 150 mm
- Ram cushion force: 200T
- Ram return force: approx. 95T
- Ram upper position: 1650 mm
- Ram stroke: 1050 mm
- Air pins recessed by 10 mm
- Minimum installation height: 650 mm
- Clamping below: manual clamping
- Clamping above: manual
- Centering: via air pin pattern
- Sliding table travel: 3000 mm
- Ram locking: Stepless
- Blanking shock damping: No
The above information is taken from the machine documentation.
The seller accepts no liability for completeness or accuracy of these details.
Nwsdpfx Acsyxhp Ds Ned
The actual technical data and functionality of the machine are decisive.
Toolmaking (Tryout / Spotting)
该广告为自动翻译,可能存在翻译错误。
Manufacturer: SCMB
Type: PHT 2000
The machine offered is a hydraulic tryout press.
In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized.
Only components from reputable European manufacturers were used for the overhaul.
A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions.
The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required.
Technical details:
- Pressure: 2000T with ram plate
- Table size: 5000 mm x 2900 mm
- Draw cushion size: 4200 mm x 1800 mm
- Draw cushion stroke: 280 mm
- Draw cushion force: 380T
- Draw cushion load: 4-way regulated draw cushion, no need for balancing
- Table height above floor: 585 mm
- Ram size: 5000 x 2900 mm
- Ram cushion size: 3900 x 1500 mm
- Ram cushion stroke: 150 mm
- Ram cushion force: 200T
- Ram return force: approx. 95T
- Ram upper position: 1650 mm
- Ram stroke: 1050 mm
- Air pins recessed by 10 mm
- Minimum installation height: 650 mm
- Clamping below: manual clamping
- Clamping above: manual
- Centering: via air pin pattern
- Sliding table travel: 3000 mm
- Ram locking: Stepless
- Blanking shock damping: No
The above information is taken from the machine documentation.
The seller accepts no liability for completeness or accuracy of these details.
Nwsdpfx Acsyxhp Ds Ned
The actual technical data and functionality of the machine are decisive.
Toolmaking (Tryout / Spotting)
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2023
10 在线广告
发送询价
电话 & 传真
+49 163 4... 广告
您的广告已成功删除
发生错误






