平压模、烫金、多功能GRAFOTRONIC
350 200254G
平压模、烫金、多功能
GRAFOTRONIC
350 200254G
VB 不含增值税
€67,500
状况
二手
位置
Kruszyn Krajeński 

显示图片
显示地图
机器数据
价格和位置
VB 不含增值税
€67,500
- 位置:
- Ceramiczna 15, 86-005 Białe Błota, PL

拨打
优惠详情
- 广告编号:
- A18949116
- 更新:
- 最近更新时间为 29.12.2025
描述
Segment I – Unwinder with stabilizing table
The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment.
In addition:
• The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working.
• Leading (pulling) servomotors ensure precise control of the material, also located in the station.
Segment II – Central (Die)
The heart of the machine is the flat die, allowing for cutting and embossing.
It has been equipped with:
• Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations.
• Upper foil unwinders enabling additional material processing.
• Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work.
• Lower trolley as an alternative to the hanging system – used depending on the specifics of the work.
Segment III – Puncher
The third segment is responsible for separating cut labels and transporting them to the receiving tray.
• Puncher – precise separation of single labels.
• Two laminators – one on each side of the puncher, with adjustable pressure.
• Unwinders and winders ensuring smooth guidance of additional raw material.
Segment IV – Rewinder
The last segment is responsible for the final winding of the finished material.
Equipped with:
Cpjdpowck U Rsfx Abxow
• Two mandrels – enabling simultaneous or alternate winding of the finished product.
• Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material.
• Slitting disc knife station.
• Whisk (waste) extraction system.
• Web sensors placed under each overhang, ensuring optimal process control.
Additional functionalities
• Remote control – the machine can be operated via the tablet included in the set.
• Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.
该广告为自动翻译,可能存在翻译错误。
The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment.
In addition:
• The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working.
• Leading (pulling) servomotors ensure precise control of the material, also located in the station.
Segment II – Central (Die)
The heart of the machine is the flat die, allowing for cutting and embossing.
It has been equipped with:
• Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations.
• Upper foil unwinders enabling additional material processing.
• Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work.
• Lower trolley as an alternative to the hanging system – used depending on the specifics of the work.
Segment III – Puncher
The third segment is responsible for separating cut labels and transporting them to the receiving tray.
• Puncher – precise separation of single labels.
• Two laminators – one on each side of the puncher, with adjustable pressure.
• Unwinders and winders ensuring smooth guidance of additional raw material.
Segment IV – Rewinder
The last segment is responsible for the final winding of the finished material.
Equipped with:
Cpjdpowck U Rsfx Abxow
• Two mandrels – enabling simultaneous or alternate winding of the finished product.
• Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material.
• Slitting disc knife station.
• Whisk (waste) extraction system.
• Web sensors placed under each overhang, ensuring optimal process control.
Additional functionalities
• Remote control – the machine can be operated via the tablet included in the set.
• Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.
该广告为自动翻译,可能存在翻译错误。
这些广告您可能也感兴趣。
小广告
Leinfelden-Echterdingen
7,442 km
FGT 印刷机械 - 加工
GMFB 3300 - Hotfoil/Screen etc.
GMFB 3300 - Hotfoil/Screen etc.
小广告
Langenfeld (Rheinland)
7,449 km
数码印花机
XeroxiGen 5 Press incl. 5th colour
XeroxiGen 5 Press incl. 5th colour
小广告
Bad Kreuznach
7,459 km
柔版印刷机
SMO Sondermaschinenbau OscherslebenEDM 200
SMO Sondermaschinenbau OscherslebenEDM 200
小广告
München
7,313 km
宾夕法尼亚州的Di425
Pitney BowesDI425
Pitney BowesDI425
小广告
Leinfelden-Echterdingen
7,442 km
FGT 印刷机械 - 加工
GMDC 330 - Age: 2016!
GMDC 330 - Age: 2016!
小广告
Kaunas
6,239 km
雷沃
Jurmet
Jurmet
小广告
파주시
2,011 km
无线胶装机(Perfect Binder)
HorizonBQ-270
HorizonBQ-270
小广告
德国
7,232 km
贴标机
GMLA 330
GMLA 330
小广告
Bischofszell
7,501 km
检查卷轴
R.P.E.LRKP 350 MIT SCHNEIDEEINRICHTUNG
R.P.E.LRKP 350 MIT SCHNEIDEEINRICHTUNG
小广告
Leinfelden-Echterdingen
7,442 km
FGT图形机械 - Labelfinisher
ROTOFLEXR 1300
ROTOFLEXR 1300
您的广告已成功删除
发生错误








































































