加工中心

FIRST MCV 300

ONLY FOR A SHORT TIME! SPECIAL PRICE!

CNC machining center with CNC path control SIEMENS 828D SHOPMILL.
In sturdy Meehanite cast design, Turcite flat guideways and hand-scraped bearing surfaces.
With sturdy hardened and ground flat guideways and direct drives on the axes.

In sturdy Meehanite cast design, Turcite flat guideways and hand-scraped bearing surfaces.

With sturdy hardened and ground flat guideways and direct drives on the axles.

Technical data:
TABLE
Hnsdpfxsr A Eufj Aaxeg
Table surface 700 x 350 mm
Table height from floor 835 mm
T-slots 16 mm x 63.5 mm / 4 pcs.
Workpiece weight max 350 kg

Travels:
X 610 mm
Y 355 mm
Z 460 mm
Distance from spindle center to column surface 415 mm
Distance spindle nose / table min. 70 mm / max. 530 mm

SPINDLE
Spindle holder SK 40 / DIN 69871 (tightening bolt: DIN 69872)
Spindle speed infinitely variable 8000 rpm
Spindle drive motor Siemens: 7.5 / 11.0 KW

AXIS FEED, digital feed motors, direct drives

All 3 feed motors are directly flange-mounted. Drive without toothed belt!
Manufacturer of the ball screws: HiWiN

X-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5

Y-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5

Z-axis
Feed motor: Siemens
Ball screw: Ø 32 x 10; C 5

FEED SPEEDS:
Rapid traverse: 20 M/min. for X and Y-axis, 18 M/min. for Z-axis
Feed rates: X - Y: 1-10 M/min.

ACCURACY
Positioning: (within 300 mm) +/- 0.005 mm
Repeat accuracy: +/- 0.004 mm

TOOL CHANGER
Tool holder: DIN 69871 with tightening bolt DIN 69872

Changer system standard: Disk changer without arm
Capacity: 10 tools
Changing time: approx. 20 seconds max.
max. tool weight: 7.0 kg
largest tool diameter: 93 (120) mm
max. tool length: 300 mm

AIR SUPPLY
Required pressure: 6.5 bar
Air consumption: 300 l / min.

Standard accessories:
- SIEMENS 828 D CNC control with "SHOPMILL" user interface
- Large selection of milling and drilling cycles
- Machining cycle for contour pockets / contour pins with islands, etc.
- Graphic functions
- Tool management
- User CF card on the control panel front
- RS 232 C interface
- USB interface on the control panel front
- RCS-Commander: front ETHERNET interface for notebook PC
- 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network
- Portable electronic handwheel
- Tapping without compensation chuck (Ridgid Tapping)
- Spindle orientation
- Color screen (LCD) 10.4"
- Manual in all 3 axes
- Semi-automatic with manual operation of the feed
- Automatic with cycle function, CNC operation without CNC knowledge
- ISO programming
- Linking of cycle programs and ISO programs
- Large memory for created programs
- Full cabin (CE)
- Heat exchanger for the control cabinet
- Automatic tool clamping
- Automatic tool changer with 10 tools
- Spindle blow-out
- Coolant system incl. oil separator
- Automatic central lubrication
- Work light
- Electronic handwheel for all 3 axes
- CE conformity, EMC filter
- 24 months full warranty Siemens "RSV"
- Two-tone paint finish: white RAL 7035, black RAL 7021

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。