数控车铣中心EUMUCO
giant 1350
数控车铣中心
EUMUCO
giant 1350
起拍價 不包含增值稅
€100,000
製造年份
2019
狀況
二手
位置
Нови Сад 

顯示圖片
显示地图
机器数据
价格和位置
起拍價 不包含增值稅
€100,000
- 位置:
- Primorska 88, 21000 Novi Sad, RS
撥打
技术细节
- 工件重量(最大):
- 5,000 千克
优惠详情
- 產品ID:
- A19347526
- 最後更新:
- 於 12.06.2025
描述
EMC Model 1350 HHH Giant Brush Sanding Machine - Never Used
Premium high volume sanding machine made in Italy. Installed and tested, but was never implemented into production.
Working width: 1.35m
Working thickness: 3mm to 150mm
CE and CSA Standards
Line machine: 900mm from floor.
3 sanding brush groups 3 zones x 11 brush heads = 33 brush heads
200mm Disc diameter
3 x 15hp gear driven motors independently housed inside the machine's basement.
Welded monocoque type frame, made in heavy duty carbon steel construction for production setting.
Kedpfx Adswrrchswjnc
Inverter controlled oscillation 70 to 140mm
Inverter controlled rotation speed 280 to 1100 rpm Inverter controlled feed belt for variable feed speeds 0.5 to 8 m/min
Adjustable vertical pressure stroke 50mm
Each zone of brushes have discs on 2 staggered rows (6 and 5)
Automatic feed belt centering device.
Soundproof protection on all doors.
Premium components - ball screws, rubber parts, electronics, pneumatics, etc.
Quick tool changer locking device for all 33 spindles
Vacuum holding system (5.5hp) under machine with short pipes and no curves.
Turbo blowers for piece and feed belt cleaning. Programmable and active by the working piece.
Extra sanding brushes: two full sets of wire stock removal brushes for rustic finishing, one set of sanding heads for finish sanding, and one set of Tynex brushes for contoured / raised sanding.
All controlled and programmed by touch screen - fully computerized machine with customizable programs.
575v, 3ph (RT Can Help Source a Transformer for US-Voltage if Need Be
Premium high volume sanding machine made in Italy. Installed and tested, but was never implemented into production.
Working width: 1.35m
Working thickness: 3mm to 150mm
CE and CSA Standards
Line machine: 900mm from floor.
3 sanding brush groups 3 zones x 11 brush heads = 33 brush heads
200mm Disc diameter
3 x 15hp gear driven motors independently housed inside the machine's basement.
Welded monocoque type frame, made in heavy duty carbon steel construction for production setting.
Kedpfx Adswrrchswjnc
Inverter controlled oscillation 70 to 140mm
Inverter controlled rotation speed 280 to 1100 rpm Inverter controlled feed belt for variable feed speeds 0.5 to 8 m/min
Adjustable vertical pressure stroke 50mm
Each zone of brushes have discs on 2 staggered rows (6 and 5)
Automatic feed belt centering device.
Soundproof protection on all doors.
Premium components - ball screws, rubber parts, electronics, pneumatics, etc.
Quick tool changer locking device for all 33 spindles
Vacuum holding system (5.5hp) under machine with short pipes and no curves.
Turbo blowers for piece and feed belt cleaning. Programmable and active by the working piece.
Extra sanding brushes: two full sets of wire stock removal brushes for rustic finishing, one set of sanding heads for finish sanding, and one set of Tynex brushes for contoured / raised sanding.
All controlled and programmed by touch screen - fully computerized machine with customizable programs.
575v, 3ph (RT Can Help Source a Transformer for US-Voltage if Need Be
您的广告已成功删除
发生错误