通用加工中心DMG
DMU 60 P
技术细节
- X轴行程:
- 600 毫米
- Y轴行程:
- 700 毫米
- Z轴移动距离:
- 600 毫米
- 最大转速:
- 12,000 转/分
提供
- 位置:
- 德国
– 距离：约 7,365 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Torque available at the spindle: see diagram in PDF
Motor power at 100% duty cycle: see diagram in PDF
Motor power at 40% duty cycle: see diagram in PDF
Spindle speed infinitely programmable: 20-12,000 rpm
Speed in setup mode: 20-800 rpm
Magazine positions: 30 units
Measuring System
Resolution X, Y, Z axis: 0.001 mm
Input increment X, Y, Z axis: 0.001 mm
Position tolerance X, Y, Z axis: 0.010 mm
Feed Drive
Motors: AC braking motors for X, Y, Z axes
Feed rate X, Y, Z axis steplessly programmable: 20-15,000 mm/min
Rapid traverse X, Y, Z axis: 60 m/min
Setup mode X, Y, Z axis: 20-2,000 mm/min
NC Swivel Rotary Table
Clamping surface: Ø630 mm
T-slot spacing: 63 mm
Number of T-slots / size: 9 / 14 H7
Center bore: Ø50H6 mm
Holding torque at 100% duty cycle A-axis: 3,866 Nm
Holding torque at 100% duty cycle C-axis: 6,008 Nm
Max. rotation of the table top A-axis: 7.3 rpm
Max. rotation of the table top C-axis: 7.0 rpm
Swivel range A-axis: ±45 / 30°
Rotational range C-axis: n x 360°
Tool holder: SK40
Operating Hours
Power-on hours: 35,099 h
Spindle hours: 9,848 h
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19517476
- 參考編號:
- AUC-2507028
- 最後更新:
- 於 21.07.2025
- 独家优惠:
- 仅在拍卖中提供
参观
德国 DMG MoriDMU 60 P hi-dyn
Oelde DECKEL MAHODMC 100 U duoBLOCK
德国 DMGDMU60 P
Burgoberbach DMG MORIDMU 60 P 60 WKZ Wechsler
Flémalle +GF+ Mikron CharmilleMikron VCE 600 pro
Hagen Deckel Maho DMGDMC 125 H duoBlock
Grüsch DECKEL MAHODMC 80 FD
Remscheid DMGDMU 200 P
Sonnenbühl DMU80 P hi-dyn
Auw bei Prüm DMG MORIDMU 80P duoblock
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。