气候试验箱 350升 Ex/lCTS
C-40/350 Ex/l -40°C /+180°C
气候试验箱 350升 Ex/l
CTS
C-40/350 Ex/l -40°C /+180°C
狀況
二手
位置
Borken 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

撥打
优惠详情
- 產品ID:
- A19446591
- 參考編號:
- 24669
- 最後更新:
- 於 27.06.2025
描述
CTS
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Iodpfx Adewvr H Ujvoa
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Iodpfx Adewvr H Ujvoa
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
这些广告您可能也感兴趣。
小广告
Haiger
7,392 km
加工中心
DMG MORICMX 600 V
DMG MORICMX 600 V
小广告
品川区
3,194 km
五轴立式加工中心
DMGDMU80 monoBLOCK
DMGDMU80 monoBLOCK
小广告
Schloß Holte-Stukenbrock
7,304 km
加工中心
Droop & ReinModimill
Droop & ReinModimill
小广告
Butzbach
7,379 km
加工中心
Starrag-HeckertHEC500D
Starrag-HeckertHEC500D
小广告
Jülich
7,499 km
立式加工中心
EDEL Werkzeugmaschinen GmbHCP4030 - CyPort 4030
EDEL Werkzeugmaschinen GmbHCP4030 - CyPort 4030
小广告
Kaufungen
7,278 km
通用加工中心
Deckel MahoDMU 80 monoblock
Deckel MahoDMU 80 monoblock
小广告
Jülich
7,499 km
EDEL CYPORT CP6830 - RetroFit
EDEL Werkzeugmaschinen GmbHCP6830 - CyPort 6830
EDEL Werkzeugmaschinen GmbHCP6830 - CyPort 6830
小广告
Tatabánya
6,878 km
平面磨床 平面磨床
JungHF 50 (2338)
JungHF 50 (2338)
小广告
Sedliště
6,789 km
加工中心
Deckel MahoDMF 220 Linear
Deckel MahoDMF 220 Linear
小广告
Ruhla
7,249 km
5 轴铣床
Deckel MahoDMU 70 eVlin
Deckel MahoDMU 70 eVlin
您的广告已成功删除
发生错误










































































































