带锯 CENTAURO R800

CENTAURO R800 + RVP210

A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance.
Kodegp I U Nopfx Al Rsnb
The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel.
Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads.
To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced.

Diameter of saw wheels 800 mm
Max. cutting height 400 mm
Max.cutting width 770 mm
Height of table from 960 mm
Table size 1060 x 800 mm
Max. and min. blade length 5530/5380 mm
Width of blade 80 x 0,8 mm
Motor power 11 (HP 15) kW
R.P.M. of wheels 680 R.P. M.
Sawblade speed 28,5 mt./sec.
Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm.
Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h
Compressed air consumption 60 Lt./min.
Working pressure of pneumatic brake 6 - 8 bar
Net weight 880 kg

RVP210
Height of feeding roller 50 mm
Feeding roller diameter 200 nm
Standard feeding rollers 2 nr.
Height of standard rollers fence 300 mm
Length of Rollers fence 600 mm
Rollers fence tilt 0-45°
Max. Roller-blade clearance 200 mt/sec
Max. fence-blade clearance 420 mm
Motor power 0,37 kW
Variable feed speed rate 0-30 mt./min
Compressed air consumption 30 Lt/min.
Working pressure 3 - 6 bar
Net weight 180 Kg