封边机Brandt
Profi KDF 670
封边机
Brandt
Profi KDF 670
製造年份
2003
狀況
二手
位置
Bitburg 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Südring 37, 54634 Bitburg, Deutschland

撥打
优惠详情
- 產品ID:
- A20822507
- 最後更新:
- 於 24.12.2025
描述
Brandt Edge Banding Machine Type: Profi KDF 670
Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application.
Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations.
Infrared hot-melt glue activation
Automatic edge magazine for coil material for thick PVC/ABS
Heavy-duty pressure zone
Centrally adjustable top pressure
Operating panel at machine infeed
PC 16 electronic control
Technical Data:
Edge thickness: 0.4 - 8 mm
Roll cut, max. 3 x 45 mm or 0.8 x 60 mm
Workpiece thickness: 8 - 55 mm
Feed rate: max. approx. 14 m/min
Tool set R = 2 mm (exchangeable for R = 3 mm)
Quickmelt gluing module
Motor-driven height adjustment for top pressure - PC 16
Adjustable infeed fence
Program-controlled adjustment for infeed fence
Additional unit for laminate overhang
Program-controlled pressure zone
Release agent application for workpiece
Jointing milling unit
Jointing cutter set, Dia
End trimming unit with chamfer/straight cut 0 - 15 degrees
Pneumatic adjustment for end trimming unit, chamfer/straight
Flush milling unit
Pneumatic adjustment for milling unit
Pneumatic two-point adjustment for vertical tracing rollers
Jointing unit 0 - 25 degrees, synchronous flush milling
Radius cutter set (exchangeable for chamfer cutter)
Program adjustment for edge thickness
Pneumatic adjustment for side tracing rollers
Profile milling unit above and below
- For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent
Scraper with quick-change heads
Pneumatic adjustment for scraper
Flat scraper glue joint
Cleaning agent application for workpiece
Buffing unit, 2 motors
Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15
Weight: 3000 kg
Total connected load: 15 kW
Lhjdpfxox Nrtnj Af Dsr
Length: 5880 mm
Location: ex-site customer
- Immediately available -
System must be dismantled by the buyer
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application.
Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations.
Infrared hot-melt glue activation
Automatic edge magazine for coil material for thick PVC/ABS
Heavy-duty pressure zone
Centrally adjustable top pressure
Operating panel at machine infeed
PC 16 electronic control
Technical Data:
Edge thickness: 0.4 - 8 mm
Roll cut, max. 3 x 45 mm or 0.8 x 60 mm
Workpiece thickness: 8 - 55 mm
Feed rate: max. approx. 14 m/min
Tool set R = 2 mm (exchangeable for R = 3 mm)
Quickmelt gluing module
Motor-driven height adjustment for top pressure - PC 16
Adjustable infeed fence
Program-controlled adjustment for infeed fence
Additional unit for laminate overhang
Program-controlled pressure zone
Release agent application for workpiece
Jointing milling unit
Jointing cutter set, Dia
End trimming unit with chamfer/straight cut 0 - 15 degrees
Pneumatic adjustment for end trimming unit, chamfer/straight
Flush milling unit
Pneumatic adjustment for milling unit
Pneumatic two-point adjustment for vertical tracing rollers
Jointing unit 0 - 25 degrees, synchronous flush milling
Radius cutter set (exchangeable for chamfer cutter)
Program adjustment for edge thickness
Pneumatic adjustment for side tracing rollers
Profile milling unit above and below
- For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent
Scraper with quick-change heads
Pneumatic adjustment for scraper
Flat scraper glue joint
Cleaning agent application for workpiece
Buffing unit, 2 motors
Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15
Weight: 3000 kg
Total connected load: 15 kW
Lhjdpfxox Nrtnj Af Dsr
Length: 5880 mm
Location: ex-site customer
- Immediately available -
System must be dismantled by the buyer
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
这些广告您可能也感兴趣。
小广告
德国
7,285 km
单板压机
JoosHP 60
JoosHP 60
小广告
Barntrup
7,268 km
单面封边机
BrandtKDF 660
BrandtKDF 660
小广告
德国
7,285 km
SCM 2250 平刨/压刨联合机
SCM2250
SCM2250
小广告
Dortmund
7,387 km
扇子
SchukoIndustrieventilator K
SchukoIndustrieventilator K
小广告
Dortmund
7,387 km
移动提取装置
AL-KOAPU 300 P
AL-KOAPU 300 P
您的广告已成功删除
发生错误


































































