加工中心 - 可立即供货 -

Biesse Rover Multi Up M C S

CNC Machining Centers Rover Multi Up M C S
Dodpfxoy Ehrxo Ad Ijkr

Working Area*:
X = 3280 mm;
Y = from 1580 to 1660 mm, depending on work conditions
Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm
Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm
Workpiece Clearance*: Y = 1900 mm
Axis Travel*:
X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm

VACUUM SYSTEM
Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X.
AUXILIARY VACUUM SYSTEM – 2 zones
Allows clamping of workpieces using vacuum templates.

Remote Control RM850

Rover Multi Up M C S Panel – Multi Purpose Regular

Configuration 2
Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions.
The tool magazines can also be retrofitted.

Uninterruptible Power Supply (UPS) for machine PC.

6 ATS workpiece supports – 18 module carriers
— 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support.
— 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts.
— 18 covers for module carriers without template.

SA (Set-Up Assistant) working table for tables up to 1550 mm.
Supported manual positioning system with motion direction indicator and position indicator.
— Sensors on each working table and along the X-axis of the working area.
— Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm.

Subdivision of the pneumatic system into 2 working areas in X.

Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm

Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle.

Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates.

Coolant system

Additional Z-axis carrier for rear machining units, with independent Z-axis.

Drilling head BH 24 L

Side tool magazine with 12 positions, integrated into the machine bed.

Turret tool magazine with 16 positions, installed directly on the X machining unit.

HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head.

Saw blade 300 mm, for tool holder.

Hi-Tech tool set
Complete set of tools for the acceptance test
Consisting of the following 9 parts

Replacement of standard PC with a high-performance PC.

Digital device for measuring tool length up to 130 mm diameter.

bSolid

NC-HOPS 8 MacroCAM Rover 1. AV
NC-HOPS MacroCAM 1. License
WorkCenter suction cup proposal
5-Axis Simultaneous
Material removal simulation
12-month warranty period

Location: ex stock 54634 Bitburg
- immediately available -

该广告为自动翻译，可能存在翻译错误。