阿博格 ALLROUNDER 720 S 3200-1300 注塑机Arburg
ALLROUNDER 720 S 3200-1300
阿博格 ALLROUNDER 720 S 3200-1300 注塑机
Arburg
ALLROUNDER 720 S 3200-1300
出厂年份
2016
状况
二手
位置
德国 

基本数据
价格和位置
- 位置:
- , 德国

拨打
技术细节
夹紧力
夹紧力:
3,200 千牛
优惠详情
- 广告编号:
- A23346005
- 参考编号:
- DE-INJ-ARB-2016-00009
- 更新:
- 最近更新时间为 17.11.2026
描述
Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
Itodpfx Ape Akr Izopsp
- Clamping Force: 3,200 kN (320 tonnes)- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor/Heating Rated Current: 125 / 70 A- Total Connected Load: 124 kW- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)- Screw Coupling: Reinforced spline geometry for high continuous dosing torques- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)- Platen / Centring: Central injection position, 160 mm centring diameter- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot - Robot Weight: 450 kg - Max. Handling Payload: 15 kg - Control Unit: SELOGICA - Pneumatic Operating Pressure: 0.
Itodpfx Ape Akr Izopsp
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Moretonhampstead
8,111 km
注塑机
ArburgALLROUNDER 570 E 2000-800
ArburgALLROUNDER 570 E 2000-800
成功
您的消息已发送。
小广告
Iszkaszentgyörgy
6,902 km
CNC注塑机
Arburg720S 3200/1300
Arburg720S 3200/1300
成功
您的消息已发送。
小广告
Burgoberbach
7,321 km
注塑机
ArburgALLROUNDER 720 H 3200-1300 244136
ArburgALLROUNDER 720 H 3200-1300 244136
成功
您的消息已发送。
小广告
Trenčianske Stankovce
6,851 km
SEPRO Erfolg 7(2017年)
SEPROSuccess 7
SEPROSuccess 7
成功
您的消息已发送。
小广告
Schwaigern
7,428 km
注塑机
Arburg570 S 2200-800 mit Multilift Select
Arburg570 S 2200-800 mit Multilift Select
成功
您的消息已发送。
小广告
Trenčianske Stankovce
6,851 km
阿博格 720S 3000 - 1300(2017年)
Arburg720S 3000 - 1300
Arburg720S 3000 - 1300
成功
您的消息已发送。
小广告
Borken
7,415 km
Wittmann Battenfeld SmartPower 210/1330注塑机,配备UNILOG B8控制系统
Wittmann/BattenfeldWittmann
Wittmann/BattenfeldWittmann
成功
您的消息已发送。
小广告
Heilbronn
7,414 km
搬运装置 SEPRO(订货号 5165)
SEPROSR 4010 S3
SEPROSR 4010 S3
成功
您的消息已发送。
小广告
Trenčianske Stankovce
6,851 km
阿博格 720S 3000 - 1300(2016 年)
Arburg720S 3000 - 1300
Arburg720S 3000 - 1300
成功
您的消息已发送。
小广告
Mierlo
7,513 km
平面磨床
RogiFSG-2050A
RogiFSG-2050A
您的广告已成功删除
发生错误






















































































































































