一次性外科口罩生产线PIA Automation Amberg GmbH
Montageanlage Einwegmasken
一次性外科口罩生产线
PIA Automation Amberg GmbH
Montageanlage Einwegmasken
EXW VB 不含增值税
€50,000
出厂年份
2020
状况
二手
位置
Berlin 

显示图片
显示地图
机器数据
价格和位置
EXW VB 不含增值税
€50,000
- 位置:
- Berlin, 德国

拨打
技术细节
- 建筑高度:
- 2,200 毫米
- 主轴数量:
- 3
- 空间需求 长度:
- 5,000 毫米
- 所需宽度:
- 5,500 毫米
- 自动化程度:
- 自动
- 生产能力:
- 3,000 单位/小时
优惠详情
- 广告编号:
- A21728618
- 更新:
- 最近更新时间为 16.04.2026
描述
We are offering this used PIA Automation production line for surgical disposable masks, manufactured in 2020. The system was operated for only 2.5 years in single-shift operation and can be described as being in "very good" condition. In addition to the production unit, the line includes a connected compressed air generation system as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks.
Year of manufacture: 2020
Operating pressure (pneumatics): 6.0 bar
Operating voltage: 3P/N/PE 400V AC 50 Hz
Connection protection: 25 A
Short-circuit capacity: < 10 kA
System Concept:
Hnodoy Ddnmopfx Agdek
The line consists of a total of three sections, which are connected by conveyor belts. In the first segment, the individual consumables are fed in via rollers, folded, the nose wire integrated, welded, and then cut to the correct length. The finished, cut masks are then conveyed by an indexing belt and transport conveyors to the subsequent stations, which are arranged in parallel. At these stations, the ear loops are fed in and welded to the face mask.
If you have any questions or require further information, please feel free to send us a message or give us a call.
该广告为自动翻译,可能存在翻译错误。
Year of manufacture: 2020
Operating pressure (pneumatics): 6.0 bar
Operating voltage: 3P/N/PE 400V AC 50 Hz
Connection protection: 25 A
Short-circuit capacity: < 10 kA
System Concept:
Hnodoy Ddnmopfx Agdek
The line consists of a total of three sections, which are connected by conveyor belts. In the first segment, the individual consumables are fed in via rollers, folded, the nose wire integrated, welded, and then cut to the correct length. The finished, cut masks are then conveyed by an indexing belt and transport conveyors to the subsequent stations, which are arranged in parallel. At these stations, the ear loops are fed in and welded to the face mask.
If you have any questions or require further information, please feel free to send us a message or give us a call.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2026
1 在线广告
发送询价
电话 & 传真
+49 30 54... 广告
您的广告已成功删除
发生错误



































