木材粉碎机

mütek MGZ 630

The ideal machine for shredding hardwood and softwood
Another machine now available (ex-works Neckartailfingen).

Motor: 18.5 kW; 400 V - 50 Hz - 3 ph,
Blades: 14+2 pieces, 40x40mm, reversible multiple times,
Rotor diameter: 260 mm,
Control system: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume approx. 0.6 cbm,
Hydraulically operated pusher
Screen perforation of your choice (12 - 40mm)
Extraction socket Ø 160 mm
Weight approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm

The following options are available at an additional cost:
- Additional row of knives + €1,990 net (28 instead of 14)
- Surcharge for segmented floor, 4-sided + €2,170 net
(prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm)
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control system for the conveyor belt and overband magnet + €2,750 net
Fpsdpfx Aod E R D Sobmeh
(start and stop synchronized with the shredder)
- Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation)

Requirements for raw material:
- The moisture content (atro) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. increase wear.

We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

该广告为自动翻译，可能存在翻译错误。