高速四面刨床

LEDINEK SUPERLES 300 5V-S150

4-Sided Lamella Planer 300 x 120 mm
Adjustable feed speed from 30 to 150 m/min.
Equipment: 2 upper and lower horizontal cutterheads Z 10;
2 right and left horizontal cutterheads, Z 10,
equipped with jointers.

- Horizontal shaft rotation speed: 5,500 rpm
- Vertical spindle rotation speed: 6,000 rpm
- Vertical spindle shaft diameter: 50 mm
- Vertical spindle clamping length: max. 185 mm

Tool diameters:
- Horizontal shafts: 205 mm
- Vertical spindle head tools: 160 - 205 mm

Cutter blocks:
- Thicknessing and surfacing shafts with cutter blocks:
- 2 x Planer head 205 x 330 mm, Z=10, screw clamping
- Lamella planer knives: 3 x 35 x 330
- 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping
- Lamella planer knives: 3 x 35 x 130

- Weight: approx. 13,000 kg
- Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm
- Installed power: 154 kW

Ljdewz Nzmjpfx Ablorh
Additional Aggregates

Lower Scoring Saw Unit
This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter.
Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed).

Technical Data:
- Scoring saw motor: 15 kW
- Saw rotation speed: 5,000 rpm
- Shaft diameter: 40 mm
- Max. cutting depth: 50 mm
- Tool diameter: 300 x 4 mm
- Extraction hood support diameters: 120 mm
- Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade.
- Scoring saw working area: 37.5 to 225 mm

Powered Lateral Infeed Roller
Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter.
- Roller diameter: 190 mm
- Roller width: 40 mm

Automatic Knife Jointing Device
The knife jointing device is fixed-mounted and manually operated.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。